Error While Loading to QRZ - My Fault
So, I used the field day program and had our club station call sign in the call sign field but apparently it reverts back to my call sign as I’m the registered user of the program. Is there an easy way to change the ADI file data with the club’s call sign? Or do I just manually fix this.?
|
Re: Visual Basic 6 API code snippets
Hi James,
Thanks for your e-mail.? I'm sorry, VB6 (which started all this and I loved) is now so far in the fossil record that I no longer have access to the code.
I'm sorry that I didn't have the answer you were hoping for.
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Monday, July 10, 2023 at 02:01:42 PM EDT, james.goodwill@... <james.goodwill@...> wrote:
Hi there,
I am after the VB6 code snippets Scott mentions in the API section of the Help web pages.
Does anyone have VB6 code to send commands to the ACLog TCP server and receive data and process the output?
Any help would be appreciated.
Thanks a bunch. James (M7SWL) 73
|
Visual Basic 6 API code snippets
Hi there,
I am after the VB6 code snippets Scott mentions in the API section of the Help web pages.
Does anyone have VB6 code to send commands to the ACLog TCP server and receive data and process the output?
Any help would be appreciated.
Thanks a bunch. James (M7SWL) 73
|
Re: Up loading files to LOTW
Hi Fred,
Thanks for your e-mail.? Edit the QSOs and put an L in the Sent Confirmed By field.? AC Log will no longer hand them to TQSL for upload.
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Sunday, July 9, 2023 at 11:46:13 AM EDT, Fred K2DFC via groups.io <k2dfc@...> wrote:
On Armed Forces Day this year I worked NSS on two different bands and entered them into AClog. When I did the first upload to LOTW I got the same error message on one of them. I said ignore and all went fine. Another upload and the 2nd NSS QSO brings up the same error every time I do an upload, and every time I have to say ignore. Is there any way to get rid of that error once and for all? Other then deleting that QSO?
--
73
Fred
K2DFC
|
Re: Up loading files to LOTW
On Armed Forces Day this year I worked NSS on two different bands and entered them into AClog. When I did the first upload to LOTW I got the same error message on one of them. I said ignore and all went fine. Another upload and the 2nd NSS QSO brings up the same error every time I do an upload, and every time I have to say ignore. Is there any way to get rid of that error once and for all? Other then deleting that QSO?
--
73
Fred
K2DFC
|
I usually get 2 error messages when I try to upload a file of contacts.
When I click on ignore on both error messages it will then upload some of the contacts usually about? 80 %
I will then go through the list of non-uploaded contacts and then click on the ones that did not get up; loaded and press select a contact from the tab.
after doing this on everyone and waiting a few minutes I can then upload the remaining ones I just did the selected contacts from.
This started a few months ago and lived with it. Anyone knows what might of happened.
Garry? ? (18-year user of N3FJP software)
|
Hi Nigel,
Thanks for your e-mail.? This FAQ here will get you going:
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Sunday, July 9, 2023 at 10:10:26 AM EDT, WA6MSE Nigel via groups.io <nlemaire@...> wrote:
I noticed that the Bearing value in the software is not the same as in the DX Spotting window. For example, KH8RRC is showing a bearing of 258 whereas the DX spotting window shows it as 234 (which I suspect is correct) I'm using DXC.VE7CC.NET?? BTW 
|
I noticed that the Bearing value in the software is not the same as in the DX Spotting window. For example, KH8RRC is showing a bearing of 258 whereas the DX spotting window shows it as 234 (which I suspect is correct) I'm using DXC.VE7CC.NET?? BTW 
|
Re: Net Control with a member number lookup
Thank you for letting me know about this.
Greg
|
Thanks Stephen. 73.
--
73.
BOB -- K6RWM
|
Re: Net Control with a member number lookup
Hi Greg,
Thanks for your e-mail.? The Net Manager form isn't user customizable, so you won't be able to use that form's net management functionality if you want to continue capturing the additional information.? You can of course customize AC Log's main form any way that you like, using some of the additional Other fields for the purposes you describe.? Details on that are here:
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Saturday, July 8, 2023 at 01:15:55 PM EDT, Greg K <gkhamrhead@...> wrote:
We run a week day morning net on 2 meters.? Callers check in with their member number and call sign, or just their call sign until they meet the criteria for a member number.? I wrote a front end for MariaDB that I use to log the nets, but it is a little hinky and un-polished.? Our daily check in record includes the Member Number, Call Sign, Name(s), Date, Daily Roster Number, and increments the number of each member's check ins by one from the last time that member checked in.
Since most of our net operators already use AC Log, I was wondering if there was a way to set up AC log to record our net check ins. Logging is much faster when all we type in is the member number, so I am really asking for 2 things.? First, the ability to enter the member number instead of the call sign to look up the member.? Realizing that until a caller meets criteria, the call sign will have to be used for lookup.? The second thing is to keep a count of how many check ins each member has.? This information is part of the criteria to gain a member number and also for bragging rights about how many check ins you have total.
|
Net Control with a member number lookup
We run a week day morning net on 2 meters.? Callers check in with their member number and call sign, or just their call sign until they meet the criteria for a member number.? I wrote a front end for MariaDB that I use to log the nets, but it is a little hinky and un-polished.? Our daily check in record includes the Member Number, Call Sign, Name(s), Date, Daily Roster Number, and increments the number of each member's check ins by one from the last time that member checked in.
Since most of our net operators already use AC Log, I was wondering if there was a way to set up AC log to record our net check ins. Logging is much faster when all we type in is the member number, so I am really asking for 2 things.? First, the ability to enter the member number instead of the call sign to look up the member.? Realizing that until a caller meets criteria, the call sign will have to be used for lookup.? The second thing is to keep a count of how many check ins each member has.? This information is part of the criteria to gain a member number and also for bragging rights about how many check ins you have total.
|
Re: N3FJP not keying FTDX5000 CW
Thanks for the quick reply Scott,
I got it solved the KEY cable from Navigator was hanging down in back of table and I wasn't aware of it not being
plugged into the FTDX5000.. I had my hand key plugged into 5000 and it worked fine, but the Navigator KEY cable
Should of been there. So NO CW output from navigator.... but data worked fine on FT. Confused me... hi
I can plug hand key into front panel. Or into Navigator key receptable.
Other than snaking the cable back up to the top tier.... I have had a good day... hi..
Always something simple.... I guess it's age getting to me. hi
Some good DX on lately, and 20m seems open most of the night somedays.
OH I have a slight problem the keyer on N3FJP MAIN LOG auto doesn't seem to be sending correctly.
I got it set at 90 wpm and it's sending maybe 30 wpm. Maybe it will fix itself... dunno..
Thanks
Joe
K1VMT
|
Re: 13 Col EXPORT QUESTION
Tu sir! ? ? Wyndell Ferguson – Sawyer/Farming/Hay ?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of Scott Davis via groups.io Sent: Friday, July 7, 2023 07:01 To: [email protected]Subject: Re: [N3FJPSoftwareUsers] 13 Col EXPORT QUESTION ? Thanks for your e-mail.? That is correct, FT4 is the submode.? The ADIF group has published their specs here: 开云体育 the Amateur Radio community with contesting and general logging software since 1997. 1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect... On Friday, July 7, 2023 at 07:52:20 AM EDT, Wyndell - K5WJF <circlef1961@...> wrote: When I export my 13 col adi files for submission the FT4 contacts are showing as MFSK.? Is this normal or did I do something wrong? ? ? 73, Wyndell –
|
Re: 13 Col EXPORT QUESTION
Hi Wyndell,
Thanks for your e-mail.? That is correct, FT4 is the submode.? The ADIF group has published their specs here:
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Friday, July 7, 2023 at 07:52:20 AM EDT, Wyndell - K5WJF <circlef1961@...> wrote:
When I export my 13 col adi files for submission the FT4 contacts are showing as MFSK.? Is this normal or did I do something wrong? ? ? 73, Wyndell –
|
When I export my 13 col adi files for submission the FT4 contacts are showing as MFSK.? Is this normal or did I do something wrong? ? ? 73, Wyndell –
|
Re: N3FJP not keying FTDX5000 CW
Hi Joe,
Thanks for your e-mail.? I'm sorry that you ran into trouble.? I'm not familiar with the Timewave Navigator, but our software sends CW identically in all rigs, using your hardware keying device plugged into your rig's straight key jack.? Make sure you have your CW port set for straight key and your hardware set for RTS or DTR, matching your settings in AC Log.
Lots more details are here:
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Thursday, July 6, 2023 at 08:30:03 PM EDT, J V <k1vmt@...> wrote:
?I have issues with N3FJP main logging program not Keying FTDX5000 TX on Transmit program
Transceiver blinks?No RF going out... using timewave navigator... Receive is fine.. Menus on 5000 should be okay.?Something weird... WSJT FT8-4 works fine.. N1MM has the same issue.
It's something simple ... any hints would be appreciated. Same results on 2 different Transceivers.
Seems like I had similar issue years ago..?
Joe
K1VMT
|
Kevin....I sent the original question on this.
My problem is in the sequence that you describe below, yes the tab sends the F2 string correctly but when I hit enter the F3 sequence is sent about 3 seconds later. That is my problem. Why the 3 second delay. I can't use it like that. I'm running one of the 13 colonies stations, and would love to get this working before the event is over! In the mean time, I'm just hitting F3 manually.
....Dave
toggle quoted message
Show quoted text
On 7/6/23 7:13 PM, Kevin Gray wrote: Fred
Did you try "Help>Ask Juliet"
If you are running a frequency, you can optionally use the Tab Sends Message (TSM) feature. To enable the Tab Sends Message (TSM) option, press Ctrl + Shift + G from the main form. With TSM enabled, when you tab from the Call field, the F2 string will be sent. When you press enter, the F3 string will be sent.
Kevin
N9VPV
-. ----. …- .--. …-
-----Original Message-----
From: [email protected] <[email protected]> On
Behalf Of Fred K2DFC via groups.io
Sent: Thursday, July 6, 2023 5:23 PM
To: [email protected]
Subject: Re: [N3FJPSoftwareUsers] TSM enter delay
I'm still trying to figure out what TSM stands for. And I use many of the contest
logs all the time.
--
73
Fred
K2DFC
|
N3FJP not keying FTDX5000 CW
?I have issues with N3FJP main logging program not Keying FTDX5000 TX on Transmit program
Transceiver blinks?No RF going out... using timewave navigator... Receive is fine.. Menus on 5000 should be okay.?Something weird... WSJT FT8-4 works fine.. N1MM has the same issue.
It's something simple ... any hints would be appreciated. Same results on 2 different Transceivers.
Seems like I had similar issue years ago..?
Joe
K1VMT
|
Fred
Did you try "Help>Ask Juliet"
If you are running a frequency, you can optionally use the Tab Sends Message (TSM) feature. To enable the Tab Sends Message (TSM) option, press Ctrl + Shift + G from the main form. With TSM enabled, when you tab from the Call field, the F2 string will be sent. When you press enter, the F3 string will be sent.
Kevin
N9VPV
-. ----. …- .--. …-
toggle quoted message
Show quoted text
-----Original Message-----
From: [email protected] <[email protected]> On
Behalf Of Fred K2DFC via groups.io
Sent: Thursday, July 6, 2023 5:23 PM
To: [email protected]
Subject: Re: [N3FJPSoftwareUsers] TSM enter delay
I'm still trying to figure out what TSM stands for. And I use many of the contest
logs all the time.
--
73
Fred
K2DFC
|
Gregg Schulz
Wyndell - K5WJF