Re: Converting from DX4WIN V 8.03
What are the discrepancies?
--
Will
KN6TZK
|
Re: [N3FJPSoftwareUsers setup problem
most ports can not be shared ( easily) so the best way to have cat on wsjtx, is to start it first, because anything logged to n3fjp will have frequency and band.? ?if you work any ssb or cw, the start n3fjp first
or use a bridge, like lpb-2 for virtual comports
Dave Garber VE3WEJ / VE3IE
I set up my ft8 first then turn on ACL.
Larry
WB2UFO
I am a relatively new ham trying to setup my ACL? software.
My rig control interface indicates that my polling works so I know ACL is communicating with my Icom 7300. However when I go to WSJT-X I have a problem.??
When I go to WSJT settings the test cat button does not work and I get an error message that says my hamlib timed out.
This is the message.
I'm concerned I may have inadvertently deleted hamlib so I found a folder that looks like this.
I apologize if I am asking this question in the wrong forum.? I have been using ACL and like it even thought I know I have only scratched the surface of what it can do.? Being 80 years old, it takes me a bit longer to learn things ? Any help/advice would be
greatly appreciated.
|
Re: How to uninstall One Drive (WAS: Learned a Valuable Lesson!!)
Myself and others have done just that only to have OD show back up on our computers after a Windows update.? However, it's kinda passive as it does not ask if you want to use it as a "backup" like on a new install.? I found it back on my computer just by accident and uninstalled it yet again.? Keep an eye out.?
?
--
73's
George - WB5JJJ
Hams over IP #100105
|
Re: [N3FJPSoftwareUsers setup problem
I set up my ft8 first then turn on ACL.
Larry
WB2UFO
toggle quoted message
Show quoted text
On April 8, 2025 2:00:44 PM MST, "Jeff via groups.io" <jeffcook@...> wrote:
I am a relatively new ham trying to setup my ACL? software.
My rig control interface indicates that my polling works so I know ACL is communicating with my Icom 7300. However when I go to WSJT-X I have a problem.??
When I go to WSJT settings the test cat button does not work and I get an error message that says my hamlib timed out.
This is the message.
I'm concerned I may have inadvertently deleted hamlib so I found a folder that looks like this.
I apologize if I am asking this question in the wrong forum.? I have been using ACL and like it even thought I know I have only scratched the surface of what it can do.? Being 80 years old, it takes me a bit longer to learn things ? Any help/advice would be
greatly appreciated.
|
Re: [N3FJPSoftwareUsers setup problem
I am a relatively new ham trying to setup my ACL? software.
My rig control interface indicates that my polling works so I know ACL is communicating with my Icom 7300. However when I go to WSJT-X I have a problem.??
When I go to WSJT settings the test cat button does not work and I get an error message that says my hamlib timed out.
This is the message.
I'm concerned I may have inadvertently deleted hamlib so I found a folder that looks like this.
I apologize if I am asking this question in the wrong forum.? I have been using ACL and like it even thought I know I have only scratched the surface of what it can do.? Being 80 years old, it takes me a bit longer to learn things ? Any help/advice would be
greatly appreciated.
|
Re: Converting from DX4WIN V 8.03
ACLog has great integration with GridTracker (which you really should be using if you're doing FT8/FT4 digital modes).? You can have those sent to the ACLog port (1100) and have ACLog listen for log entries on that port.? Then you can just manually put the CW/SSB into the other logger as you do now.
?
An easier way to go about mirgrating, is to upload all of your DX4WIN contacts to QRZ or LotW and then download them via ACLog.
?
Ryan KI6BTY
|
How to uninstall One Drive (WAS: Learned a Valuable Lesson!!)
I uninstall One Drive completely. You can disable it instead, if you wish, but I just got rid of the whole thing. Here's information on how to do that if you want to get rid of it:
?
?
You can't uninstall it in Windows 8 but you can disable it. It's all explained in the Microsoft article. Depending on what you want to to, there are links in the article that take you to other articles. I figured if I uninstalled it, I couldn't accidentally turn it back on.?
?
Donald KX8K
?
?
?
?
|
Re: Converting from DX4WIN V 8.03
Thank you Travis.
?
I'm getting significant discrepancies when importing the ADIF file directly from DX4WIN 8.05 into AC Log,? so that's not going work until I can find the time to resolve those issues.
?
I'm trying to come up with a way to use AC Log for my Digital QSOs only, and DX4WIN for my CW and SSB contacts.?? Thus my later post on ADIF Files.
?
73 Mark K3MSB
?
?
|
Re: AC Log and ADIF Files
Please ignore.....?? I didn't see this appear in groups.io and thought I sent it to the wrong email, so I entered a later one directly on groups.io.
?
Sorry.....?? learning this groups.io stuff...
?
Mark K3MSB
|
Importing ADIF file to confirm existing AC Contacts
Hello
?
I have an ADIF File.
I want to import that into AC Log and have AC Log check the "QSL Rec" bix? and enter "L" in the "Rec Conf By" field.
Can AC Log do this?
?
73 Mark K3MSB
?
|
Can AC LOG import an ADIF file and have AC LOG confirm existing QSOs that match those in the ADIF File?
73 Mark K3MSB
|
Re: Converting from DX4WIN V 8.03
Mark,
As far as I know, thats it, export your log from DX4WIN in an ADIF file, then import it into ACLog.
toggle quoted message
Show quoted text
--
I'm good in the callbook!
47 & 73 de Travis KB5ILY / PG00041468
870-260-6068 (Phone)
--
Travis W. Burton, NP, ESQ., KB5ILY (QCWA #36353) & GROL / Arkadelphia AR
President, DeGray Amateur Radio club, Inc.
EC - Clark County AR / Assistant Section Emergency Coord., SWAR
SATERN, ARRL Instructor & VE, AREC I, II & III
W5YI Instructor & VE
ARRL Technical Specialist
Internet: mailto:kb5ily@...
WWW:
WWW:
GOD BLESS THE UNITED STATES of AMERICA
Only he who Attempts the Ridiculous can Achieve the Impossible. (WILL HENRY)
Linux is my operating system of choice.
Computers are like Air Conditioners,
they stop working correctly when you open windows.
<><
|
Re: Learned a Vaulable Lesson!!
I have used file sharing across multiple computers for many years. Over wired ethernet is is fast and secure. On Mon, 7 Apr 2025 20:25:23 -0400 "Bill via groups.io" <bill@...> wrote: I've had my log file on OD for a couple of years. It makes it easier to share
between 3 computers. If you take the time to understand how it works, it's
actually very simple. -- 73 -Jim NU0C
|
Re: Learned a Vaulable Lesson!!
I've had my log file on OD
for a couple of years.? It makes it easier to share between 3
computers.? If you take the time to understand how it works, it's
actually very simple.
Keep regular backups in
your backup archive just in case, but I've (luckily) never been
forced?to use one.
?
Bill
W2EB
East
Syracuse, NY
On 4/7/2025 at 12:32 PM,
K7GA via groups.io < k7ga@...>
wrote:
toggle quoted message
Show quoted text
Ageee, OD is most certainly NOT a safe place for your log. Your
log is irreplaceable and the only record of your QSOs. In addition to
uploading to Club Log, LoTW and QRZ immediately after a QSO (or at least no
less than daily if the bands are
really active) I also have the main log file on my main HD
Get
?
So many users are tricked by M$ into using OD as a
"backup" not realizing all their documents (where your ACL is stored),
pictures and some other folders are 100% REMOVED from your local
computer(s).?
?
Thank you! Now I
understand why my Pictures folder seemingly disappeared, plus, the version of
it I found under c:\users\chris\Onedrive\Pictures
Has nothing in it! I
can¡¯t even figure out how to restore those files, view them online, anything.
?
I have zero trust in
Onedrive.
|
Converting from DX4WIN V 8.03
Hi Everyone
Ready to take the plunge and convert my log from DX4WIN to AC Log.
Anything(s) in particular I need to know besides exporting / importing the ADIF File?
73 Mark K3MSB
|
Re: Learned a Vaulable Lesson!!
Sorry, upload got interrupted- and my log file is also backed up to two places - another HD on my main computer as well as a thumb drive. ?It would be a catastrophic loss to me if my N3FJP log disappeared. My number 1 QSO listed is dated 11/18/1979
and as of today my most recent QSO number is 71,892 .. ?I don¡¯t do eQSL - I tried to at the beginning but wound up getting an incredible?number of bogus requests for confirmations of QSO¡¯s I never had - mostly listed as SSB. I am a CW op. ?
K7GA?
Get
toggle quoted message
Show quoted text
Ageee, OD is most certainly NOT a safe place for your log. Your log is irreplaceable and the only record of your QSOs. In addition to uploading to Club Log, LoTW and QRZ immediately after a QSO (or at least no less than daily if the bands are
really active) I also have the main log file on my main HD
Get
?
So many users are tricked by M$ into using OD as a "backup" not realizing all their documents (where your ACL is stored), pictures and some other folders are 100% REMOVED from your local computer(s).?
?
Thank you! Now I understand why my Pictures folder seemingly disappeared, plus, the version of it I found under c:\users\chris\Onedrive\Pictures
Has nothing in it! I can¡¯t even figure out how to restore those files, view them online, anything.
?
I have zero trust in Onedrive.
|
Re: Learned a Vaulable Lesson!!
Ageee, OD is most certainly NOT a safe place for your log. Your log is irreplaceable and the only record of your QSOs. In addition to uploading to Club Log, LoTW and QRZ immediately after a QSO (or at least no less than daily if the bands are
really active) I also have the main log file on my main HD
Get
toggle quoted message
Show quoted text
?
So many users are tricked by M$ into using OD as a "backup" not realizing all their documents (where your ACL is stored), pictures and some other folders are 100% REMOVED from your local computer(s).?
?
Thank you! Now I understand why my Pictures folder seemingly disappeared, plus, the version of it I found under c:\users\chris\Onedrive\Pictures
Has nothing in it! I can¡¯t even figure out how to restore those files, view them online, anything.
?
I have zero trust in Onedrive.
|
Re: Can the rig interface be suspended and reactivated while switching batteries?
THHAT's the shortcut I was going to suggest but there are many others!
Attached is list I printed and keep with my 'shack-info' file....
?
--
TNX-n-73's fer now....
KF6JS - Tony
|
Re: Learned a Vaulable Lesson!!
JIM:?
?
You are correct, OD "can" be used for sharing, and I know many that have done this after they understand what "backup" really does.? But M$ doesn't give you this option up front.? They just ask you to start "backup" and that is the black hole so many have fallen into.? It's ultimately a sales gimmick to make $$$.?
?
--
73's
George - WB5JJJ
Hams over IP #100105
|
Re: Learned a Vaulable Lesson!!
One of the first things I do is disable One Drive on any PC I work with.? I have my own secure and fully encrypted backup solution that the provider does not have access to.? N3FJP is not the only program to get "borked" by one drive (technical term), other well known loggers have the same issue and advise against using it.
?
All of my contacts get automatically backed up to QRZ and LotW, so both of those act as offsite storage and can be used to restore my database if needed.
|
WB5JJJ - George
Ryan Huggins
KB5ILY - Travis W. Burton
Jim Shorney
Tony Yamin