Re: 2.4 Bug report??

#172

Hi Edward,

Thanks for your e-mail.  

Yes, right now only SSB and CW modes are read via rig interface.  I 
plan to read additional modes in future enhancements.

If you would like to log another mode but still want ACLog to read 
the frequency you can select "Don't Use" in the mode options box on 
the Rig Interface form and then enter the mode manually.

Please let me know if you have any other questions.

73, Scott
N3FJP

--- In N3FJP_Software_Users@..., "Edward Leicester" 
<kg4qmi@e...> wrote:
Scott, just noticed something. On the Rig Interface, the software does not recognize FM/AM in Modes. If I change from SSB to CW it 
changes to CW. If I change from CW to either AM or FM it goes back to 
SSB. If I change from SSB to either AM or FM nothing happens

Settings are as follows:

ICOM
9600, N,8,1
RTS
2sec
Mode BV= Rig
String to use has (40) in both 

Rig is Icom 736

Just curious if anyone else has seen this.

Edward/kg4qmi

------------------------------------
Edward Leicester
Reg. 1 Director
North Carolina Baptist Men
-----------------------------------
EC-Perq. County, Area 1
NC-ARES
Hertford NC
252-426-7246
KG4QMI/FM16/6m# 2097

2.4 Bug report??

Edward Leicester

#171

开云体育

Scott, just noticed something. On the Rig Interface, the software does not recognize FM/AM in Modes. If I change from SSB to CW it changes to CW. If I change from CW to either AM or FM it goes back to SSB. If I change from SSB to either AM or FM nothing happens

?

Settings are as follows:

?

ICOM

9600, N,8,1

RTS

2sec

Mode?BV= Rig

String to use has (40) in both

?

Rig is Icom 736

?

Just curious if anyone else has seen this.

?

Edward/kg4qmi

------------------------------------
Edward Leicester
Reg. 1 Director
North Carolina Baptist Men
-----------------------------------
EC-Perq. County, Area 1
NC-ARES
Hertford NC
252-426-7246
KG4QMI/FM16/6m# 2097

Re: VHF Contest Logger and TS-2000

Dee D. Flint

#170

I am using the Kenwood TS-2000 radio and the rig interface works fine.  Here
are my settings:

Rig:  Kenwood
CommPort: 5
Baud Rate: 9.6k
Parity:  None
Data Bits: 8
Stop Bits: 1
Connection Power:  RTS
Radio Polling Rate:  500ms
Check box for "Use Frequency"
Check circle for "Rig"  in Use Mode By

I adore this radio by the way.

Dee D. Flint, N8UZE

Show quoted text

----- Original Message -----
From: "snkdavis" <SNKDavis@...>
To: <N3FJP_Software_Users@...>
Sent: Sunday, August 24, 2003 2:48 PM
Subject: [N3FJP_Software_Users] Re: VHF Contest Logger and TS-2000

Hi Jack,

Thanks for your e-mail.  I don't have a 2000 here to test for rig
interface (not yet anyway, I've been drooling over that rig), but
I've had other good reports from those who have.  I'm not aware of
anyone having to change the default settings.  Just make sure that
you are using VFO A and that you have selected the proper power
setting for your interface.

If there is someone else using the rig interface with a Kenwood 2000
on this e-mail list please chime in.

73, Scott
N3FJP

--- In N3FJP_Software_Users@..., "Jack Crabtree"
<w7jlc@a...> wrote:
Is anyone using the VHF contest logger program with a TS-2000? I
cannot get the radio to change bands on the log when I change the
radio. When I try the connect test, I get "no response". Yet when I
go to the screen to make the radio change frequency, it works fine.I
have all the settings correct but "no response". Any help out there?

To unsubscribe from this group, send an email to:
N3FJP_Software_Users-unsubscribe@...

Your use of Yahoo! Groups is subject to 

Re: VHF Contest Logger and TS-2000

#169

Hi Jack,

Thanks for your e-mail.  I don't have a 2000 here to test for rig 
interface (not yet anyway, I've been drooling over that rig), but 
I've had other good reports from those who have.  I'm not aware of 
anyone having to change the default settings.  Just make sure that 
you are using VFO A and that you have selected the proper power 
setting for your interface.

If there is someone else using the rig interface with a Kenwood 2000 
on this e-mail list please chime in.

73, Scott
N3FJP

--- In N3FJP_Software_Users@..., "Jack Crabtree" 
<w7jlc@a...> wrote:
Is anyone using the VHF contest logger program with a TS-2000? I 
cannot get the radio to change bands on the log when I change the 
radio. When I try the connect test, I get "no response". Yet when I 
go to the screen to make the radio change frequency, it works fine. I 
have all the settings correct but "no response". Any help out there?

VHF Contest Logger and TS-2000

#168

Is anyone using the VHF contest logger program with a TS-2000? I 
cannot get the radio to change bands on the log when I change the 
radio. When I try the connect test, I get "no response". Yet when I 
go to the screen to make the radio change frequency, it works fine. I 
have all the settings correct but "no response". Any help out there?

AC Log 2.4 Update

Thomas Giella KN4LF

#167

开云体育

Scott,

? There was an update to AC Log 2.4 last week that corrected an error. I deleted it before downloading it. Could you post the update again please?

?

73,
Thomas F. Giella
Space & Atmospheric Weather Forecaster
C/S KN4LF
4208 Thackery Way
Plant City, FL, USA 33566
EL87WX

?

SWFWMD Rainfall Observer #574
NWS Tampa Bay, FL Skywarn Spotter #HIL-249

?

Florida Space & Atmospheric Weather Institute:

?

?

?

---
Outgoing mail is certified Virus Free Thanks To Grisoft AVG.
Checked by AVG anti-virus system ().
Version: 6.0.509 / Virus Database: 306 - Release Date: 8/12/2003

Re: recall & DX Spotting?

#166

A check box on the screen sounds good for DXspot. I want to use the 
recall to see if I need to send my QSL card with an SASE.

--- In N3FJP_Software_Users@..., SNKDavis@a... wrote:
Hi Mike,

Thanks for the suggestion.  Let me give that some thought.  Off the cuff I 
don't see any reason I couldn't populate the fields when you click on a contact.

On another note, we have been kicking around the idea of a check box to send 
a DX spot on entry.  Would there be any objection if I made that a menu option 
instead?  That eliminates the need for adding and customizing another control 
to the main form.

73,

Scott, N3FJP
snkdavis@a...
<A href=">www.n3fjp.com</A> 

开云体育 the Amateur Radio Community with general logging and contesting 
software since 1997.

In a message dated 08/18/03 5:18:48 PM Eastern Daylight Time, 
mikedsokc@y... writes:

I never really saw a need for the Recall command, until now. Now 
that we have the list match feature I can hit Recall and see if I 
need a QSL on one of the fields. The only problem is, you can only 
recall the last entry. Can you add a feature so that you could 
recall the selected entry?

Re: recall & DX Spotting?

Edward Leicester

#165

开云体育

No problem. Must have just misunderstood your response. Probably just emails passing each other. Everything is fine as far as I know.

?

Tnx, Ed.

------------------------------------
Edward Leicester
Reg. 1 Director
North Carolina Baptist Men
-----------------------------------
EC-Perq. County, Area 1
NC-ARES
Hertford NC
252-426-7246
KG4QMI/FM16/6m# 2097

Show quoted text

----- Original Message -----

From: SNKDavis@...

To: N3FJP_Software_Users@...

Sent: Tuesday, August 19, 2003 5:36 AM

Subject: Re: [N3FJP_Software_Users] recall & DX Spotting?

Hi Ed,

In your follow-up e-mail regarding search you found that the problem was that you had rig interface enabled.? As you know, this added unmatched criteria to your search.? I haven't had any other reports of problems with the search feature.? What seems to be the problem?

73,

Scott, N3FJP
snkdavis@...

开云体育 the Amateur Radio Community with general logging and contesting software since 1997.

In a message dated 08/18/03 8:22:00 PM Eastern Daylight Time, kg4qmi@... writes:

Scott, my personal preference would be the "check box" on the main? screen. That way I can decide on a spot-by-spot basis. But I can certainly use these options. Just would like to simplify the spotting process. Going to the Dx Spotting Setup and hitting Spot Last and then entering additional comments is slow. BUT, that is much better than going to an entirely different program to start the process. With either option you chose to go with, can you tag a field like "Other 4" to be sent also, then we can enter comments that we want sent with the spot?
?
BTW, did you find anything on the Search Function?

Ed.

------------------------------------
Edward Leicester
Reg. 1 Director
North Carolina Baptist Men
-----------------------------------
EC-Perq. County, Area 1
NC-ARES
Hertford NC
252-426-7246
KG4QMI/FM16/6m# 2097

----- Original Message -----
From: SNKDavis@...
To: N3FJP_Software_Users@...
Sent: Monday, August 18, 2003 7:36 PM
Subject: Re: [N3FJP_Software_Users] recall &DX Spotting?

Hi Matt,

Yes, actually I was thinking of two options:

Spot DX on entry (contacts <>your country would be spotted)
Spot All on entry (all contacts entered would be spotted)

If either of the menu options were checked they would perform their stated function.? If not, the entry would not be spotted.

73,

Scott, N3FJP
snkdavis@...

开云体育 the Amateur Radio Community with general logging and contesting software since 1997.

In a message dated 08/18/03 7:00:03 PM Eastern Daylight Time, mattpatt@... writes:

Scott,

So basically it would be an option in the menu instead that you could check.? Then while. it's checked every entry that you would enter into the log would be spotted.? Is this how it would work?? If so, sounds great to me!

Matt

----- Original Message -----
From: SNKDavis@...
To: N3FJP_Software_Users@...
Sent: Monday, August 18, 2003 5:06 PM
Subject: Re: [N3FJP_Software_Users] recall &DX Spotting?

Hi Mike,

Thanks for the suggestion.? Let me give that some thought.? Off the cuff I don't see any reason I couldn't populate the fields when you click on a contact.

On another note, we have been kicking around the idea of a check box to send a DX spot on entry.? Would there be any objection if I made that a menu option instead?? That eliminates the need for adding and customizing another control to the main form.

73,

Scott, N3FJP
snkdavis@...

开云体育 the Amateur Radio Community with general logging and contesting software since 1997.

In a message dated 08/18/03 5:18:48 PM Eastern Daylight Time, mikedsokc@... writes:

I never really saw a need for the Recall command, until now. Now
that we have the list match feature I can hit Recall and see if I
need a QSL on one of the fields. The only problem is, you can only
recall the last entry. Can you add a feature so that you could
recall the selected entry?

To unsubscribe from this group, send an email to: N3FJP_Software_Users-unsubscribe@...

Your use of Yahoo! Groups is subject to the .

Re: recall & DX Spotting?

#164

Hi Ed,

In your follow-up e-mail regarding search you found that the problem was that you had rig interface enabled.? As you know, this added unmatched criteria to your search.? I haven't had any other reports of problems with the search feature.? What seems to be the problem?

73,

Scott, N3FJP
snkdavis@...

开云体育 the Amateur Radio Community with general logging and contesting software since 1997.

In a message dated 08/18/03 8:22:00 PM Eastern Daylight Time, kg4qmi@... writes:

Show quoted text

Scott, my personal preference would be the "check box" on the main? screen. That way I can decide on a spot-by-spot basis. But I can certainly use these options. Just would like to simplify the spotting process. Going to the Dx Spotting Setup and hitting Spot Last and then entering additional comments is slow. BUT, that is much better than going to an entirely different program to start the process. With either option you chose to go with, can you tag a field like "Other 4" to be sent also, then we can enter comments that we want sent with the spot?
?
BTW, did you find anything on the Search Function?

Ed.

------------------------------------
Edward Leicester
Reg. 1 Director
North Carolina Baptist Men
-----------------------------------
EC-Perq. County, Area 1
NC-ARES
Hertford NC
252-426-7246
KG4QMI/FM16/6m# 2097

----- Original Message -----
From: SNKDavis@...
To: N3FJP_Software_Users@...
Sent: Monday, August 18, 2003 7:36 PM
Subject: Re: [N3FJP_Software_Users] recall &DX Spotting?

Hi Matt,

Yes, actually I was thinking of two options:

Spot DX on entry (contacts <>your country would be spotted)
Spot All on entry (all contacts entered would be spotted)

If either of the menu options were checked they would perform their stated function.? If not, the entry would not be spotted.

73,

Scott, N3FJP
snkdavis@...

开云体育 the Amateur Radio Community with general logging and contesting software since 1997.

In a message dated 08/18/03 7:00:03 PM Eastern Daylight Time, mattpatt@... writes:

Scott,

So basically it would be an option in the menu instead that you could check.? Then while. it's checked every entry that you would enter into the log would be spotted.? Is this how it would work?? If so, sounds great to me!

Matt

----- Original Message -----
From: SNKDavis@...
To: N3FJP_Software_Users@...
Sent: Monday, August 18, 2003 5:06 PM
Subject: Re: [N3FJP_Software_Users] recall &DX Spotting?

Hi Mike,

Thanks for the suggestion.? Let me give that some thought.? Off the cuff I don't see any reason I couldn't populate the fields when you click on a contact.

On another note, we have been kicking around the idea of a check box to send a DX spot on entry.? Would there be any objection if I made that a menu option instead?? That eliminates the need for adding and customizing another control to the main form.

73,

Scott, N3FJP
snkdavis@...

开云体育 the Amateur Radio Community with general logging and contesting software since 1997.

In a message dated 08/18/03 5:18:48 PM Eastern Daylight Time, mikedsokc@... writes:

I never really saw a need for the Recall command, until now. Now
that we have the list match feature I can hit Recall and see if I
need a QSL on one of the fields. The only problem is, you can only
recall the last entry. Can you add a feature so that you could
recall the selected entry?

Re: recall & DX Spotting?

#163

开云体育

Right on!? That would be very cool!

Show quoted text

----- Original Message -----

From: SNKDavis@...

To: N3FJP_Software_Users@...

Sent: Monday, August 18, 2003 6:36 PM

Subject: Re: [N3FJP_Software_Users] recall & DX Spotting?

Hi Matt,

Yes, actually I was thinking of two options:

Spot DX on entry (contacts <> your country would be spotted)
Spot All on entry (all contacts entered would be spotted)

If either of the menu options were checked they would perform their stated function.? If not, the entry would not be spotted.

73,

Scott, N3FJP
snkdavis@...

开云体育 the Amateur Radio Community with general logging and contesting software since 1997.

In a message dated 08/18/03 7:00:03 PM Eastern Daylight Time, mattpatt@... writes:

Scott,
?
So basically it would be an option in the menu instead that you could check.? Then while. it's checked every entry that you would enter into the log would be spotted.? Is this how it would work?? If so, sounds great to me!
?
Matt

----- Original Message -----
From: SNKDavis@...
To: N3FJP_Software_Users@...
Sent: Monday, August 18, 2003 5:06 PM
Subject: Re: [N3FJP_Software_Users] recall &DX Spotting?

Hi Mike,

Thanks for the suggestion.? Let me give that some thought.? Off the cuff I don't see any reason I couldn't populate the fields when you click on a contact.

On another note, we have been kicking around the idea of a check box to send a DX spot on entry.? Would there be any objection if I made that a menu option instead?? That eliminates the need for adding and customizing another control to the main form.

73,

Scott, N3FJP
snkdavis@...

开云体育 the Amateur Radio Community with general logging and contesting software since 1997.

In a message dated 08/18/03 5:18:48 PM Eastern Daylight Time, mikedsokc@... writes:

I never really saw a need for the Recall command, until now. Now
that we have the list match feature I can hit Recall and see if I
need a QSL on one of the fields. The only problem is, you can only
recall the last entry. Can you add a feature so that you could
recall the selected entry?

To unsubscribe from this group, send an email to: N3FJP_Software_Users-unsubscribe@...

Your use of Yahoo! Groups is subject to the .

Re: recall & DX Spotting?

Edward Leicester

#162

开云体育

Scott, my personal preference would be the "check box" on the main? screen. That way I can decide on a spot-by-spot basis. But I can certainly use these options. Just would like to simplify the spotting process. Going to the Dx Spotting Setup?and hitting Spot Last and then entering additional comments is slow. BUT, that is much better than going to an entirely different program to start the process. With either option you chose to go with, can you tag a field like "Other 4" to be sent also,?then we can enter comments that we want sent with the spot?

?

BTW, did you find anything on the Search Function?

?

Ed.

------------------------------------
Edward Leicester
Reg. 1 Director
North Carolina Baptist Men
-----------------------------------
EC-Perq. County, Area 1
NC-ARES
Hertford NC
252-426-7246
KG4QMI/FM16/6m# 2097

Show quoted text

----- Original Message -----

From: SNKDavis@...

To: N3FJP_Software_Users@...

Sent: Monday, August 18, 2003 7:36 PM

Subject: Re: [N3FJP_Software_Users] recall & DX Spotting?

Hi Matt,

Yes, actually I was thinking of two options:

Spot DX on entry (contacts <> your country would be spotted)
Spot All on entry (all contacts entered would be spotted)

If either of the menu options were checked they would perform their stated function.? If not, the entry would not be spotted.

73,

Scott, N3FJP
snkdavis@...

开云体育 the Amateur Radio Community with general logging and contesting software since 1997.

In a message dated 08/18/03 7:00:03 PM Eastern Daylight Time, mattpatt@... writes:

Scott,
?
So basically it would be an option in the menu instead that you could check.? Then while. it's checked every entry that you would enter into the log would be spotted.? Is this how it would work?? If so, sounds great to me!
?
Matt

----- Original Message -----
From: SNKDavis@...
To: N3FJP_Software_Users@...
Sent: Monday, August 18, 2003 5:06 PM
Subject: Re: [N3FJP_Software_Users] recall &DX Spotting?

Hi Mike,

Thanks for the suggestion.? Let me give that some thought.? Off the cuff I don't see any reason I couldn't populate the fields when you click on a contact.

On another note, we have been kicking around the idea of a check box to send a DX spot on entry.? Would there be any objection if I made that a menu option instead?? That eliminates the need for adding and customizing another control to the main form.

73,

Scott, N3FJP
snkdavis@...

开云体育 the Amateur Radio Community with general logging and contesting software since 1997.

In a message dated 08/18/03 5:18:48 PM Eastern Daylight Time, mikedsokc@... writes:

I never really saw a need for the Recall command, until now. Now
that we have the list match feature I can hit Recall and see if I
need a QSL on one of the fields. The only problem is, you can only
recall the last entry. Can you add a feature so that you could
recall the selected entry?

To unsubscribe from this group, send an email to: N3FJP_Software_Users-unsubscribe@...

Your use of Yahoo! Groups is subject to the .

Re: recall & DX Spotting?

#160

开云体育

Scott,

?

So basically it would be an option in the menu instead that you could check.? Then while. it's checked every entry that you would enter into the log would be spotted.? Is this how it would work?? If so, sounds great to me!

?

Matt

Show quoted text

----- Original Message -----

From: SNKDavis@...

To: N3FJP_Software_Users@...

Sent: Monday, August 18, 2003 5:06 PM

Subject: Re: [N3FJP_Software_Users] recall & DX Spotting?

Hi Mike,

Thanks for the suggestion.? Let me give that some thought.? Off the cuff I don't see any reason I couldn't populate the fields when you click on a contact.

On another note, we have been kicking around the idea of a check box to send a DX spot on entry.? Would there be any objection if I made that a menu option instead?? That eliminates the need for adding and customizing another control to the main form.

73,

Scott, N3FJP
snkdavis@...

开云体育 the Amateur Radio Community with general logging and contesting software since 1997.

In a message dated 08/18/03 5:18:48 PM Eastern Daylight Time, mikedsokc@... writes:

I never really saw a need for the Recall command, until now. Now
that we have the list match feature I can hit Recall and see if I
need a QSL on one of the fields. The only problem is, you can only
recall the last entry. Can you add a feature so that you could
recall the selected entry?

To unsubscribe from this group, send an email to: N3FJP_Software_Users-unsubscribe@...

Your use of Yahoo! Groups is subject to the .

recall function & list matches

#158

I never really saw a need for the Recall command, until now. Now 
that we have the list match feature I can hit Recall and see if I 
need a QSL on one of the fields. The only problem is, you can only 
recall the last entry. Can you add a feature so that you could 
recall the selected entry?

Re: recall & DX Spotting?

#161

Hi Matt,

Yes, actually I was thinking of two options:

Spot DX on entry (contacts <> your country would be spotted)
Spot All on entry (all contacts entered would be spotted)

If either of the menu options were checked they would perform their stated function.? If not, the entry would not be spotted.

73,

Scott, N3FJP
snkdavis@...

开云体育 the Amateur Radio Community with general logging and contesting software since 1997.

In a message dated 08/18/03 7:00:03 PM Eastern Daylight Time, mattpatt@... writes:

Show quoted text

Scott,
?
So basically it would be an option in the menu instead that you could check.? Then while. it's checked every entry that you would enter into the log would be spotted.? Is this how it would work?? If so, sounds great to me!
?
Matt

----- Original Message -----
From: SNKDavis@...
To: N3FJP_Software_Users@...
Sent: Monday, August 18, 2003 5:06 PM
Subject: Re: [N3FJP_Software_Users] recall &DX Spotting?

Hi Mike,

Thanks for the suggestion.? Let me give that some thought.? Off the cuff I don't see any reason I couldn't populate the fields when you click on a contact.

On another note, we have been kicking around the idea of a check box to send a DX spot on entry.? Would there be any objection if I made that a menu option instead?? That eliminates the need for adding and customizing another control to the main form.

73,

Scott, N3FJP
snkdavis@...

开云体育 the Amateur Radio Community with general logging and contesting software since 1997.

In a message dated 08/18/03 5:18:48 PM Eastern Daylight Time, mikedsokc@... writes:

I never really saw a need for the Recall command, until now. Now
that we have the list match feature I can hit Recall and see if I
need a QSL on one of the fields. The only problem is, you can only
recall the last entry. Can you add a feature so that you could
recall the selected entry?

Re: recall & DX Spotting?

#159

Hi Mike,

Thanks for the suggestion.? Let me give that some thought.? Off the cuff I don't see any reason I couldn't populate the fields when you click on a contact.

On another note, we have been kicking around the idea of a check box to send a DX spot on entry.? Would there be any objection if I made that a menu option instead?? That eliminates the need for adding and customizing another control to the main form.

73,

Scott, N3FJP
snkdavis@...

开云体育 the Amateur Radio Community with general logging and contesting software since 1997.

In a message dated 08/18/03 5:18:48 PM Eastern Daylight Time, mikedsokc@... writes:

Show quoted text

I never really saw a need for the Recall command, until now. Now
that we have the list match feature I can hit Recall and see if I
need a QSL on one of the fields. The only problem is, you can only
recall the last entry. Can you add a feature so that you could
recall the selected entry?

ACLog & NAQP Updates

#157

Hi All,

I have a couple of quick updates:

Amateur Contact Log

A problem has come to light when running the Awards (formerly Calculate) function for the "Other 2" field in ACLog 2.4.? I have corrected ACLog and uploaded it back to the website this morning.? If you have not yet installed ACLog 2.4, you can click this link to download the full installation file:

If you have already installed ACLog 2.4, please follow these steps:

-? Close ACLog 2.4 if it is currently open

-? Click this link to download the corrected ACLog.exe file:

-? Save the corrected .exe file to c:\program files\AClog 2.4

-? Start ACLog normally

Versions 1.6 of NAQP and NAQP Network Logs Now Available!

The Cabrillo submission files created by versions 1.5 and earlier did not include the power description.? The new versions have been updated to include it.

If you operated the NAQP contest this weekend your Cabrillo file may bounce when submitted.? If so, open your Cabrillo file in a text editor such as Windows Notepad and change the category line to one of the following:

CATEGORY: SINGLE-OP ALL LOW SSB
CATEGORY: SINGLE-OP ALL QRP SSB
CATEGORY: MULTI-TWO ALL LOW SSB

Save the file, and then you can resubmit it.

Thanks to all who have taken the time to thoroughly check out the new Amateur Contact Log upgrade.? I REALLY appreciate it!

73,

Scott, N3FJP
snkdavis@...

开云体育 the Amateur Radio Community with general logging and contesting software since 1997.

Does upgrade show in title bar?

[email protected]

#155

I've downloaded and installed the 2.4 upgrade and I think that's what I'm using now, but the title bar still says ACLog version 2.3 -- is that what everyone else also experienced after download and install?

Chuck, K9PLX

LW MW SW Logging Program

Thomas Giella KN4LF

#153

开云体育

Hi Steve,

? I downloaded?your latest version of the?"Amateur Contact Log 2.4" software and it's great. Have you ever considered a general purpose logging program for LW, MW and SW listeners and DX'ers? I think it would be a big hit in the SWL community.

? BTW your website of is linked to my "KN4LF 160 meter Amateur Radio Resources And More" at under"DX And Contest Resources" in the left column.

?

73,
Thomas F. Giella
Space & Atmospheric Weather Forecaster
C/S KN4LF
4208 Thackery Way
Plant City, FL, USA 33566
EL87WX

?

SWFWMD Rainfall Observer #574
NWS Tampa Bay, FL Skywarn Spotter #HIL-249

?

Florida Space & Atmospheric Weather Institute:

?

?

?

---
Outgoing mail is certified Virus Free Thanks To Grisoft AVG.
Checked by AVG anti-virus system ().
Version: 6.0.509 / Virus Database: 306 - Release Date: 8/12/2003

Re: Does upgrade show in title bar?

#156

Hi Chuck,

After you run the installation procedure by double-clicking the setup file, you will be able to start version 2.4 from the Windows Start Menu.? You will find version 2.4 in the N3FJP Software program group.? The title bar will say 2.4.

73,

Scott, N3FJP
snkdavis@...

开云体育 the Amateur Radio Community with general logging and contesting software since 1997.

In a message dated 08/16/03 2:20:04 PM Eastern Daylight Time, k9plx@... writes:

Show quoted text

I've downloaded and installed the 2.4 upgrade and I think that's what I'm using now, but the title bar still says ACLog version 2.3 -- is that what everyone else also experienced after download and install?

Chuck, K9PLX

Re: Search function

Edward Leicester

#150

开云体育

Never mind. Rig Interface is the culprit. Since R/I automatically populates freq/band fields, they?must become part of the search function. Therefore search only matches those fields entered. The problem was, I wanted to find an entry in the log to update the qsl received, Search wouldn't find it because I only knew the call. Not sure if there is a way around that or not. I guess as long as the TAB feature finds it, thats ok. Have a good weekend.

?

Ed.

------------------------------------
Edward Leicester
Reg. 1 Director
North Carolina Baptist Men
-----------------------------------
EC-Perq. County, Area 1
NC-ARES
Hertford NC
252-426-7246
KG4QMI/FM16/6m# 2097

Show quoted text

----- Original Message -----

From: Edward Leicester

To: N3FJP_Software_Users@...

Sent: Saturday, August 16, 2003 8:42 AM

Subject: [N3FJP_Software_Users] Search function

Hi Scott, I have a question. I just installed 2.4 on a slightly newer PC running w98 with 128meg. I moved everything over from the old w95 laptop (rig interface, log files, telnet, callbook, etc.). Everything seems ok except search. If I enter a call and hit ALT-S it does not find the entry. If I enter the call and TAB it shows the info. This does work on the w95 machine. I have compared settings between the 2 machines but I wouldn't think it would be a setup issue. Any thoughts.

?

Ed.

------------------------------------
Edward Leicester
Reg. 1 Director
North Carolina Baptist Men
-----------------------------------
EC-Perq. County, Area 1
NC-ARES
Hertford NC
252-426-7246
KG4QMI/FM16/6m# 2097

To unsubscribe from this group, send an email to: N3FJP_Software_Users-unsubscribe@...

Your use of Yahoo! Groups is subject to the .