You could try putting a 100uF cap between the pins. Also you might try
adding a.1000uF cap on the 5v line to to smooth out the adc ref.
Jacob
On Feb 24, 2012 10:16 AM, "Kirk Wallace" <kwallace@...>
wrote:
**
I don't use my ModIO analog inputs for any application yet, but I am
curious about reducing the ~10% variation I get using a potentiometer
between the +5(pin1) and Ground(pin4) for each input. Is there a common
fix for this? Thanks.
--
Kirk Wallace
California, USA
