开云体育

If your delivery address is in Ireland, AddressPal makes things cheaper (~$16.50 from the USA). You still have to pay tax and customs charges but the postage charge and admin charge are much more

Bryan I can't claim I am the best judge of sound either. :) Some days I get lost listening and can't think anymore. lol. I only record vocals so as far as a mic I am more after vocals than anything.

You need hearing protection, the real thing. Highly recommended. https://www.sensaphonics.com/collections/plugs-sleeves/products/erseriesplugs -Scott -- ---- Scott Helmke ---- scott@...

Oh, I probably have other narrations around in my backup hard drives with the original capsule.? And, you might be correct with them using a K12 capsule, however, between the Blue and my 3U Audio CM1

Thank you Bryan for your post! A few thoughts myself. I really wish you had a test with the orginal capsule in the mic. From what I thought the capsule in the baby bottle was the k12 type and I

Well, I'll let you have a listen for yourself.? Just me talking my fool head off per normal.

Bryan so how does it sound with the rk47? I heard it works great for the blue bird since the k12 cap in it has sharp Sss sounds. Baby bottle fixes that issue. I love the sound of both caps. If I ever

If you sand the edges with 400 grit and make everything is tight you will be fine. Interestingly I have seen a couple times where. Thought I had a mic body resonance and it was actually the mic stand.

Thanks again both! Jules that ringing or and faraday was what I was talking about! I know the BM 800 she'll if hit on accident can produce that tinny sound on the signal while recording. Other than

Great question. The body should not affect noise. With that said, I have had issues where it did. One of the functions of the body is to be a faraday cage for the capsule and electronics. If the metal

I just tore one of these down a month ago and dropped a RK47 capsule into it.? The switches have posts that have "Beauty" covers on them that come out of the mic body.? They are basically a gold

One option you might like to consider if this really is important to you? If you are building a? 'True Condenser OPA mic' using the circuit in the Instructable, you can gain an extra 2 or 3dB in

Certainly not because of the switches! I see two probable explanations: One is that the measurement method has changed and the first was over optimistic. You must remember that some data are doctored

Thank you Jules! Do you think that BM 800 body would having negative effect on self noise and or the sound? I have no issues using one of these for the body. I really like the look of the BM 8000. Not

Here is a pic!

Hi everyone, I can't believe I got this off eBay for only $73. The guy that sold it knew nothing and never tested it. The switches are missing but I can use a screwdriver. I was the highest bidder! I

Hey Jesse, I have built four of those exact mics and they are really good. Finding donor bodies is the real challenge. I was (and still am a bit) using the "U87" clone bodies from AliExpress. Like

HI again, So after doing a lot of reading this is what I came up with. I believe this is everything I need as far as the microphone is concern? I still need a donor mic and a 5 pin connect and if

"The rear side of every Braunmuhl-Weber style (dual diaphragm, large diameter) capsule, including the K47 and CK12 styles, is part of the sound of the front side. If you were to change the rear side

Some great info! I didn't realize that these capsules are fetless and thus don't need the polarization like I was using on the EM272s. I don't have any OPA164x opamps on hand. How would I modify a