开云体育

John,Running Mach3 on both, I have a VFD on the Router and the Lathe.I set the on/off and speed manually on the lathe, the Router on/off is with code. Both are Huanyang VFD's, I used to be able to

John, I'm using G-code through Mach 3 to drive an on-off relay for my Sherline spindle, and set the speed manually. Thayer

I believe you definitely need an encoder on the spindle itself or toothed belt and use encoder on motor if it has one. Power tapping has to be closed loop. John Sent: June-13-21 2:26 PM To:

I’ve never tried. But, I think that you might need an in-band spindle for power tapping. Sent: Sunday, June 13, 2021 5:30 PM To: [email protected] Subject: Re: [MachCNC] Spindle Control

Andy, Is ModBus fast enough for reversing and tracking for power tapping? John Sent: June-13-21 2:11 PM To: [email protected] Subject: Re: [MachCNC] Spindle Control VFD w/ 3-phase motor on

VFD w/ 3-phase motor on both lathe and mill, controlled by Mach4 thru Modbus. Sent: Sunday, June 13, 2021 3:50 PM To: [email protected] Subject: [MachCNC] Spindle Control Quick little survey

I have a VFD controlled spindle on my router and this is controlled via my gcode. Cheers Calum

VFD 3 phase motor manually speed set and on/off. Sent: Sunday, June 13, 2021 12:50 PM To: [email protected] Subject: [MachCNC] Spindle Control Quick little survey on what everyone has on their

Quick little survey on what everyone has on their machine for spindle control. 1. Do you have a VFD on a 3 phase motor for Lathe or Mill. 2. Does the CNC controller drive the spindle or do you set

That is not Epic at all! LOL I will see if I can get it to download ______________________________ Brian Barker Engineering / Devlopment ArtSoft | Newfangled Solutions Livermore Falls, Maine

I see that the Coil Winder screen is on the website, but when I try to download it I get: Epic 404 - Article Not Found Sent: Wednesday, April 28, 2021 10:40 AM To:

Thanks Peter. I'll look into that. John Sent: June-05-21 6:47 PM To: [email protected] Subject: Re: [MachCNC] Modbus control You should use the Modbus plugin that interfaces to Mach3 via brains.

Thanks Peter, I kind of figured that. My Modio is back in the box at the moment. My friend is having a few issues but some of those are also self-inflicted. He now tells me he doesn't use the Modio

You should use the Modbus plugin that interfaces to Mach3 via brains. Have a look at; https://www.homanndesigns.com/pdfs/Using_Modbus_with_Mach3.pdf cheers Peter

Hi John, It’s not supported in the same was Mach3 is not supported. ? cheers, Peter

My friends MACH3 system (on WIN-NT) has a MODIO. I am helping him fine tune and document the system so I'm running his xml file here on my workstation (WIN-7). I also have one of Peter's MODIO

Thanks. I think the issue is regardless of what pins run what motor if you press the right arrow key to move the X axis that the Y axis DRO changes on the screen. True if you switch the pins that

Hello John I just wanted to be sure before I posted this but I did duplicate the problem bike going into ports and pins under configuration and swapping the step and Direction pin number between x

Thanks Tony, He tells me the problem is now fixed. He can't tell me how. I'm suspecting that he had his XY motors crossed and _thought_ he was pressing the right arrow key when watching the Y DRO

Sound like he plugged something in wrong. Can’t see how Fusion or bad caps would swap an axis like that. Although… Fusion used to have the X & Z axis swapped (so X was up) until the CNC