开云体育

Doesn't matter. I use 15 myself... Art www.artofcnc.ca

Hi Bengt: I recommend at least a 500Mhz, but 750 is preferred. 128Meg minimum and XP or Win2000 Thanks, Art www.artofcnc.ca

That would be it. Explode the drawing first, this will change it to lines from splines.. Art www.artofcnc.ca

Peter: For that I took a ballpoint point with the clicker at the top, removed the spring and put the spring on the other end of the insert. It then "springs" inward.. Art www.artofcnc.ca

Manual Data Input = MDI (F2) Enter you move like G00 X1.25 in the input box. Press enter and there it should go.

Hello there, how can I move to a specified position. Ideally I want to define the point by entering coordinates in DRO and then press a button to go Can anybody help? Thanks Peter

motor load should be proportionnal to the winding current for servos, for stepper it's perhaps not as simple. With directx it's possible to send forcefeedback informations to the joystick. This has

It will only work if you have referencing switches. The red leds at left of the positions DRO have to be green to get softlimits working. Olivier.

Les, strange but it is the case. i think it's because i have the same hotkey on 2 differents buttons. it's not the first time i see this problem. i didn't had time to investigate more yet, but will

These look like they would make good touch probe switches http://oeiwcs.omron.com/webapp/commerce/command/ProductDisplay?prrfnbr=387&prmenbr=316 --Greg Nuspel http://www.ckua.com Radio for the

I can see it now, you can actually feel a crash :-)

I was wondering if anyone had any experience with these http://www.etisystems.com/ If the price was good I'd think you could strip the electronics out of an exsisting PC joystick and end up with

Hi, I've completed installing the spindle sensor for indexing and was wondering what is the "suggested" pin number to assign the signal to. John

Hi, What is the minimum CPU and memory needed for MACH2 to run W2K or XP? Bengt

Hi Robin, Force feedback makes no difference. Now if we could find some way of monitoring the motor load and feeding it back to the computer we could make use of force feeback :-) Les INDECO

Thanks Bob. Nothing for Home or do you use the same sensors for limit and home? Thomas

It's probably because your drawing is a series of SPLINEs instead of POLYLINEs. Hugh

Hi; I sometimes like to 'plot' out my work on paper before commiting it to cutting. Does anyone know of a source for 'sprung' plotter pens which are small and could be made to fit into a sherline

Hi; Rather than me re-inventing the wheel, has anyone evaluated the varoious utilities for converting raster images to vector ?? I am interested in this primarily to use MACH for engraving and

Hi Art; that fixed it, thanx. But now I have a similar problem importing .dxf files, here's what was created: (File dolphins.tap ) (Sunday, February 29, 2004) G90G80G49 G0 Z1.0000 M5 G0 Z1.0000