开云体育

My first thought would be a differences in the settings or software algorithms for noise filtering. Cheers Peter Homann - (from my mobile) http://www.homanndesigns.com

I've been building up my CNC system for the milling machine using a PC with dual boot for both WIN-XP and LinuxCNC. I'm using the parallel port for both at the moment since it's easier to switch

Hi Graham, You can't use the Mach3 Modbus plugin and the legacy Mach3 Modbus interface at the same time. It's one or the other. Have you read the article I wrote on using the Mach3 modbus interface

I’d email Peter; I’m sure he can tell you what you need. Sent: Saturday, January 11, 2020 5:01 PM To: [email protected] Subject: [MachCNC] Using USS and MOD io panel I have an almost

I have an almost working small mach3 controlled router. USS provides I/O and works fine. I have a Homan Pendant which includes the Homan M100 Mod IO board. The micropump VB script as per the docs from

Hi Bob; ?The pros and cons are relevant to the user. The Pokey57CNC by Polabs is a one board solution, which works well with Auggie, Mach3 or Mach4 as plugins. If you currently have MAch3 working on

I have used both . They both are excellent. The Pokey57CNC is more powerful with features than the ESS. The pokeys has a lot of complexity to it. The ESS is a lot simpler but will run your machine

I'm getting ready to convert a Laguna CNC IQ router to Mach4. What are folks thought these days about the pluses and minuses of using an ESS vs the PoKeys 57?

This morning I finally found a chance to spend some time with the CNC and I think it is missing pulses to the motor, as I notice the Smooth Stepper red lights are blinking at the same time the motor

The usual, but I don't know if it applies to Mach 4 and your machine.. Make sure that you don't have your HDD going to sleep in power settings. If it's a long program it could get interrupted by the

i think you mill the pocket in the treat, not the cat, although it would be great to just mill the cat once instead of having to mill each treat. Best regards, Spencer Chase 67550 Bell Springs

missing steps only at the tend of the run? or do you mean missing pulses to the motor/motion? check for motor current and or wire flex connectivity to the motor in question. ptegler

I am running Mach 4 on windows 10 with a smooth stepper.? Have been running programs for 4 months,? Machine just started missing steps during the final portion of a pocket mill.? I have double

Ah so you tie the cat to it .. ! Great idea

Looks like your persistence paid off. Congratulations on a job well done!

Nice! Sent: January-01-20 10:35 AM To: [email protected] Subject: [MachCNC] zombie Dyna Mini MIll 10 years I traded a guy one of my CNC control units for the dyna mini mill castings. The machine

10 years I traded a guy one of my CNC control units for the dyna mini mill castings. The machine was missing many parts and the Y axis ball screw was damaged. I have made many parts for this machine

Sorry this comment should have gone to another topic

Mike: There is a printer port driver for Mach4(available as an add-on license from Art Fenerty), but it has some limitations as to what OS it can run with. Your C11G is designed to work with a

I now see my mistakes running Mach 3 and not Mach 4. I have already bought electronics comparable with Mach 3. I was trying to keep it simple and now I have created some problems. The BOB I bought