开云体育

It is now working and displaying the correct RPM. In tracing the three? encoder pulses I found a bad connection between the M16D board and the PoKeys board.

pick me! pick me!

i have no idea how to help here, but i can tell you a 7.5V Wall Wart walwart is not what you think it is. it may work fine for what it was designed for, but step outside those parameters and all bets

Usually you add the transistor to flip the polarity of the signal, ie, you want active to be high instead (or whatever it is). That usually means you bought the wrong sensor. The 200mA would be

I've watched a video that suggests that I need to run a further wire from the Pin 10 and Pin 11 connections to the Brown V+ Wires of the sensors using a transistor. The size I'm not sure yet though

I got the subscribe messages and all.. looks like it's working. Nice work Steve! ?-Ben

Anyone here have experience setting up Proximity Sensors with a Gecko G540? I can't get mine to run properly. The sensors have 3 wires: Brown V+, Blue V- and Black Sensing. I have the Blue wires

开云体育 has notified me that the transfer process has completed. It looks like the messages made it OK. The files did not come over. I will try again, and upload manually from my archive if that

Hi Art, All, Yes, Steves done a great job moving the group over. I've registered the ModIO?group /g/ModIO/messages to be migrated over from the Yahoo group. No sure hpw long it will

Thanks to those involved in making the move possible, looking forward to seeing data when changed over. Emgee

VFD/Convertor Drives rectify AC (split or 3 phase) to DC then chop it up to get 3 phase AC. Seems like you don't need to rectify the source and can buy a drive that takes DC input and gives 3 phase

Hello Everyone: ?Welcome to the new group. I just wanted to send a thx to Steve Stallings for everything he did to swap this group to its new location. This was a very long running group on Yahoo

I need the means in my own machine shop on my farm of operating totally on DC power replenished by Solar Panel Arrays feeding a huge battery bank through a charge controller.? I have the technical

Welcome to the new home for Mach1mach2CNC as MachCNC on 开云体育. Below is the farewell message posted to Yahoo. The time when Yahoo will no longer accept new content for this Yahoo group is 28

This post may become a duplicate. My first attempt didn't seem to make it to the Yahoo list. The new group on 开云体育 will be: MachCNC You do not need to sign up for the group, that

Can someone find it in their heart to send me two files, mach3mil.xml and BL-USbmach-V32.dll I just bought CNC Router 3018-MX3 and the disk will not allow my computer to copy files off the disk. Rod

wow... just logged into groups.io..... knew I'd been here before....found the group I started to move ..back in 2016!!! I'd archived all my old sites on Yahoo, when they were talking about killing the

Hi Art and all members: The match forum held a big place in my old heart ,for many years, as well as other groups like CAD CAM DRO, Between these two groups, I have seen over the years a great number

OK, a new group is being set up on 开云体育 and hopefully everything will transfer without difficulty. Art and Brian have blessed this process and provided the access needed. Wish us luck.

According to the Yahoo notice: https://au.help.yahoo.com/kb/SLN31010.html?impressions=true these groups aren’t closing, merely having a “major function reduction”. Ok then. All content