开云体育

"Keep it simple, keep it pure and get rid of all the CAM functions." Ditto! Carl

Doug et. al. My personal opinion is that a Cam program is a Cam program, a Cad program is a Cad program, and a controller is a controller. I don't think an excellent control program like Mach2-n

Art wrote: Hi Art: A while ago I suggested you load a DXF file with certain options. Am I to assume (from the above) that you can now optionally turn only certain (entire) layers on? For example,

No, you're not. Art has it fixed for next version. -- Steve Blackmore

Ive been playing with configure output devices and each time I open it and then press reset the mist and flood toggle between Ext Act 2 and 3. I was trying to use it in a macro but at this rate I

Hi All: I have implemented 2 new Macro commands for those who have the knowhow to use them... BYTE GetPortByte(USHORT PortAddress) SHORT PutPortByte(USHORT PortAddress, BYTE data) GetPortByte

Todd: THCOn() and THCOff() Art www.artofcnc.ca

Todd: For comments you can use REM this is a comment There is no way to display a message as yet though. Art www.artofcnc.ca

Hi, Is there a g-code or macro function that will toggle the THC on and off? Todd

Hi, In a macro, how do you enter text that has no effect on the macro, just explanations of what the line is. Also how do you display info on the screen with out having a question attached,

Steve, When I first started looking at spindle control I had a brief look at PWM to DC conversion but could't come up with a way of doing it without a lot of circuitry. The easy way is to use a

Hi again Bernard - I altered my circuit, without too much sucess. The response is still slightly curved. I've posted a file called pwmv.pdf with a couple of graphs of voltage output versus speed

Has anyone tried this guys drivers out? Here is an ebay link: http://cgi.ebay.com/ws/eBayISAPI.dll? ViewItem&category=42920&item=2550592527 Thanks, Richard Konnen

Jerry: Great news. Yours is the first confirmed thread from Mach2. That sounds very promising indeed. Thanks for the update, keep up the great work. Thanks, Art www.artofcnc.ca

Hi All, After finishing my ball screw project and building a new adjustable mount for my spindle index sensor, I thought I'd try cutting a thread. I wasn't super happy until I compared it to a

I ran across this more by mistake than by design. I have modifed my Post to do the following: G70 F84 G90 M05 G4P1 G01Z0.500F40 G00X11.780Y3.789; move to start of cut G01Z0.250F40 ; lower head to

Cheers Bernard, after reading what one was I realise I am already nearly using one <G>. I will try adding a cap across the -ve to output on the op amp and see what happens. I've a feeling that it may

Hi, On the DXF plasma imports, it would be nice if a macro ( e.g. m50 something )could be called instead of the m03 m05's that are installed by default. A header and footer line would be very

Todd: G28 problem is found and repaired. I have found the extremae problem and am trying to correct it for next release. Thanks, Art www.artofcnc.ca

Hi Art, Have you been able to replicate the g28.1 & extrema problems that I was having? If not let me know & I will send a file that will replicate them. Todd some DXF for all Optimization