开云体育

Cool. configurable

Arthur, Do you rotate the saw head? I have a 9 foot beam/coldsaw that I've thought of making into a an XY, for alum. plate. I'd be interested in seeing what you've got. wrote: manufactures of

Hi bloy2004, Thanks,, having fun now. mike

TRY msg #13817 #13982 Good luck Alex problesm. keep up

Hi Dan - somebody mentioned it didn't work. If your current setup works, forget it. If not, turn it off and try. -- Steve Blackmore

Dan: Some have reported they had to turn off hyperthreading when running MAch2. Art www.artofcnc.ca

I couldn't find anything on the group about hyperthreading problesm. What were they? Dan wrote: us wrote: via a

John I will test this when I get to work. The problem with stoping the code... I will have to try that. Thank you and I will have it fixed Brian points screen toolpath

wrote: Brian, Had a play with it and I can't break it as regards coding. I am struggling with the start of the routine. Selecting centre seems to work fine but any other of the corner points starts

A G49 command with an H1, H2 or appropriate H# for the location of the Z length offset in your tooltables. Don

Digest 797 has an overall size of 92K, 80K of which was requotes of previous messages.... Try to trim them down, please ... / mark

Ok Great Sorry for the run around. Thanks Frank

I don't know what your Ap is but if you would like it to just run I can help you with that... Or the other thing you can do is add the bolt pattern to the screen set you are using to run the

HI Art, Thanks, that explains a lot cheers, Remo. launch the

Oh ok great So the line Driver will work? Just follow the DFX drawing Correct?

OK James thanks for the help. I kind of figured it wouldn't. I hope I can return it. Thanks Frank

Sorry I didn't read you message carefully. No, it probably will not work. We need to let people know to order the open collector. I will let Bob know to change the PDF on his web page. Jim

Yes it will, I sent the DXF files to you. Jim

Frank, I sent it to the address below. FC911C@... Jim

Hi: Cannot find a problem here as yet. I'll have to attempt thuis one again..Will let you know.. This also works here... Thanks, Art