开云体育

Thanks for reply. The fustrating issue is the motion,control box is literally a black box. Unlabeled, no part number. To replace it is a major, the drives are all servo/encoder F/B and TCPIP cable

Sorry, The Openbuilds controller is a 4-Axis Blackbox controller. BlackBox Motion Control System X32 | | | | | | | | | | | BlackBox Motion Control System X32 SHOP NOW - BlackBox CNC

Why don't you look at the Openbuilds controller?

Hello, I am now the owner of this 5 axis mill from Chinacnczone Store. I was initially going to get it with MACH3, the shop persuaded me to purchase it with Easycnc as a alternative controller

couldn't you string a couple of G33's together? https://www.youtube.com/shorts/vzy376NQP_U

Hi Brian, it's mostly the Vital EC01 board that I'm interested in, but it would be nice to have a chat with somebody who's actually used the system before committing. However, there just seems to be

Not using it but these guys should be able to help you with the mach4 cfg file:

Hi, We have been running it here for 5 years :) In the past 2 years we have been doing capacitance height sensing for fiber laser and that has been working very well! The PC's that will not effect

After seeing a LinuxCNC video on EtherCAT last year, it intrigued me enough to purchase a set of EtherCAT closed loop steppers, and a couple Beckhoff modules to do some testing, as I like the idea of

When ever I have performed this I work out the tool profile the same as you would for a Multi Start thread. Not sure how that would collate to Mill threading.

As I don't have an encoder on my lathe spindle, only a single slot for Mach3 threading, I would consider doing this on my mill using a thread milling type of process and a thread milling type of tool.

In general practice the Z axis in a lathe is converted by logic to a c axis(rotary) to perform these tasks. To do that a 0 degree point (master slot) is used to find this point. From there it is a

n the attached pic, there is an oil grove that starts at the end, goes in roughly an inch in 270 degrees and then backs out in 270 degrees. In the pic you can't see the exit, but is 180 degrees from

I don't remember doing any docs for it. it was done a few years ago (I think). If you have any issues the support guys worked with users to make it what it is so they have worked on

Ok. Thanks. I'll check it out. Is there any documentation - perhaps in the download or maybe a thread from the past dealing with it's usage. Thanks

follow link click on Mach4 ScreenSets on the left side scroll to the bottom _____ Sent: Saturday, April 29, 2023 4:33 PM To: [email protected] Subject: Re: [MachCNC] Coil Winder The

The coil winder screen is packaged in a profile. Please have a look on this webpage. Newfangled Solutions Mach4 Downloads machsupport.com Thanks Brian

I have a mach4 license and have it installed. But I continue to use Mach 3 for various reasons. I'd give it a try again if required. So to answer the question: Where is all the info kept on the

I have been winding coils and strange shaped spring using Mach3-milling and a 4th axis Stepper for driving the coil. It gives perfect control of the coil x-y-z control of the wire feed nozzle. It

We did make a Mach4 winder screen. I’m not sure where the Mach3 one is at this time.