开云体育

Art, just wanted to let you know that I have tested J. Cullins' macro and on my home pc it shows to work good. I will try it on the cnc tonight and try your system with the button

Danial: You can only jog if you have a JogMode control on the screen... Art www.artofcnc.ca

Hi Henry: Sorry, but it would be just about impossible. The Mach2 driver is extremely tight, Servo-To-Go people took a look at the problem and gave up. The driver and the OCX are just too strict in

hello all, Will this joystick work with Mach2? ---------------------------------------------------> http://www.cnccontrols.com/usbjogstick.asp Robin

Hello all, I made a new screen, starting from scracht, and I think I miss something. I can?t jog the machine using the keyboard. Anyone knows what I miss here? Is it possibile to jog the machine

Drek: I'm on it, Thanks,.. Art www.artofcnc.ca

wrote: switched Have you looked at the Rutex 991h step/direction to servo +-10 converter card? It should interface between MACH2 and your stock servo amps. Art will have to address any interface

Hello, How could I possibly write drivers for my 3rd-party servo-board ? I have written driver modules for EMC, and I would like to write similar drivers for Mach2. The board is made by Siemens,

Just to recap the problem I'm having. When ever I make a Z axis movement it travels farther than it should by about .015". It does it in the Z+ and Z- directions. It's not always .015" sometimes its

Same problem here. Derek <brian_barker@u...> wrote: the

Les, i got a strange problem today with keygrabber. it seems user key 21 and user key 22 have the same code : 232. I don't know yet if my problem come from here because it's very strange. A macro

When I home the machine (I do all axis at once) the machine homes the Z and stops all the axis and tells me SOFT limits!!! Not a happy machine. This is on rel 4 Thank you Brian

I tried the 2 formats without success. i got another problem today with "reference all axis" actual button. sometimes i have to push the button, the referencing stop after the first referenced axis,

kelev, kalb), also in Spanish (Arabic influence) like the pronunciation of the word for 20 which can sound like bentae or ventae The amount of general knowledge in this group is amazing...

Olivier: I haven't tried it in a macro button, only in a macro file. I will try the button... Are you using this format, or a call? RefCombination 2 Thanks, Art

Monte: If you've gotten the Rtuex program to run, then your fine. If using the motherboard, then you need to jumper the pi9ns for SPI mode of the board, and add a resistor (100 ohms) between two

Guys: The puns are good, but making jokes about any religion runs the risk of offending some members of the group who may be followers. It's best to make the jokes off list if you feel that they

in the copy of Infidel !!!!!!!!!!!

Allah means God. It is a personal name, which Allah calls Himself in the Koran. That is where we get it. It can also be found in an Aramaic copy of the Bible, and even Christian Arabs say Allah. Who

<Theoretically it could even be set up to work from another computer connected on a network...> Yes, i confirm this work in real world. We could control mach2 from a joystick connected on another