thanks i'll do that. i actually knew that and ad done it before
but forgot as i am forgetting a lot of things.
On 12/11/2021 6:02 AM, Tom Hesselman
wrote:
Spencer,
The easiest way to switch versions back and forth is to
rename directories. I rename Mach4Hobby to something
else,?like Mach4Hobby_4612, install the dev version from
scratch, open two explorer windows and copy license, profiles,
screens, docs if you've added any yourself, everything needed,
then you can switch back and forth just by renaming
directories.
Tom
there is no gereat hurry i will probably try the new
version especially if i can back it out easily. if i have
the current version installer do i just need to run it to
back out the update? hopefully i can remember to set the
jog increment and not break an expensive cutter.
everything is working so well with mach4 my minor
customizations and smooth stepper that i do not want to
*!ck anything up but i am somewhat forgetful and would
like to fix this problem.
On 12/10/2021 1:43 PM, Brian Barker wrote:
We have them on the FTP server but I would like to get
the testing done before I get you a new version. But if
you want to test it out you are more than welcome to do
so. Just know that it is not fully tested (that is what
we are doing now).
Not every browser supports such old time stuff (Yeah
that seems silly to me but I guess it is what it is)
That is a path to the folder where we keep the Dev
versions.
Thanks
Brian
______________________________
Brian Barker
Webpage:
my email is messing up so i don't know if the last
email went out. how do i get the corrected version?
the one on the site has the same rev number as what i
have now. can you send a link to the new version?
On 12/10/2021 11:47 AM, Brian Barker wrote:
Spencer, I checked the log and I fixed that issue
on the following day
Revision: 4725
Author: brianb
Date: Friday, May 14, 2021 10:25:03 AM
Message:
Mach4GUI: Update to make sure Inc Jogging is
matching what is in the jogging array
----
?We are testing to get a release out now but please
know when you told me about your issue the first
time I fixed it :)
Thanks
Brian
______________________________
Brian Barker
Webpage:
the problem with jogging one inch when it says
.01" at startup is also a problem any news on
this? i have thelatest version and verified the
problem.
On 12/10/2021 10:35 AM, Gary wrote:
Ok thanks, but this problem
with the toolpath being off center, has become
a real problem for me..
?
I just ram a job this
morning.. I started by probing to find the
center of part, when centered I zeroed the X
and Y
Then loaded the tool and
probed the tool Hight so that was set, then
loaded the g code file.
Checked the X and Y they
were at zero the z was at the correct height.
Started to run the job the
X and Y went no where near the correct
position and the z dove into the part¡ wrecked
part now
?
So I flipped over and did
the same thing exactly and it cut prefect . .
?
I have had this happen
before when I run the part the first time if I
re zero center everything and try again it
runs fine..
?
I have tried this on 3
different computers also
?
Any suggestions,
?
Gary
?
Sent from
for Windows
?
From: Brian
Barker
Sent: Thursday, December 9, 2021
3:46 PM
To: [email protected]
Subject: Re: [MachCNC] Question
about Macros and dialog box's, and or
messagebox
?
All new to me.. Lets get what we can for data
and see what we can find. I think that is the
best thing to do.
?
Thanks
Brian
______________________________
?
Brian Barker
?
Webpage:
On 12/9/2021 2:55 PM,
Gary wrote:
Ok Thanks Brian
I have run into another problem, not sure
what the cause..
when i load the gcode file it never shows
the machining to start in the parts center
in the tool path display... form a couple of
my profiles, if i start a run and then stop
re zero the dro's and regen the tool path
its now starting in the middle.. in the tool
path display..
but i do have a couple profiles that don't
have that problem i don't see any setting's
that are different.
Do the profiles go bad? or get some sort of
glitch, don't see any difference other than
the way the tool path starts when the gcode
is first loaded and its way off center
position
Gary
--
Spencer Chase
67550 Bell Springs Rd.
Garberville , CA 95542 USPS mail only
Laytonville, CA 9545 UPS/Fedex only
--
Spencer Chase
67550 Bell Springs Rd.
Garberville , CA 95542 USPS mail only
Laytonville, CA 9545 UPS/Fedex only
--
Spencer Chase
67550 Bell Springs Rd.
Garberville , CA 95542 USPS mail only
Laytonville, CA 9545 UPS/Fedex only
--
Spencer Chase
67550 Bell Springs Rd.
Garberville , CA 95542 USPS mail only
Laytonville, CA 9545 UPS/Fedex only
