Hi again,
The z has to be at any # other than 0 ( say 2" before you start the
g28.1z1, just type the g28.1z1 into the mdi window twice and you
should see it happen.
Thanks
Todd
--- In mach1mach2cnc@..., Art <fenerty@a...> wrote:
Hi TorchHeads:
I need help with this one. On my system G28.1 Z-5 for example will
move the
Z to relative Z-5 and then do a homing routine. This is repeatable
time
after time. How can I make it do the move back to 1 or whatever.
Can you
send me a G-Code file which will cause this to happen repeatedly. I
do think
theres a bug here, but it seems line one of those that hides under
the
carpet.
Thanks,
Art
www.artofcnc.ca
