开云体育

Hi TorchHeads:

I need help with this one. On my system G28.1 Z-5 for example will move the
Z to relative Z-5 and then do a homing routine. This is repeatable time
after time. How can I make it do the move back to 1 or whatever. Can you
send me a G-Code file which will cause this to happen repeatedly. I do think
theres a bug here, but it seems line one of those that hides under the
carpet.

Thanks,
Art
www.artofcnc.ca

Hi again,
The z has to be at any # other than 0 ( say 2" before you start the
g28.1z1, just type the g28.1z1 into the mdi window twice and you
should see it happen.
Thanks
Todd
--- In mach1mach2cnc@..., Art <fenerty@a...> wrote:

Hi TorchHeads:

I need help with this one. On my system G28.1 Z-5 for example will

move the

Z to relative Z-5 and then do a homing routine. This is repeatable

time

after time. How can I make it do the move back to 1 or whatever.

Can you

send me a G-Code file which will cause this to happen repeatedly. I

do think

theres a bug here, but it seems line one of those that hides under

the

carpet.

Thanks,
Art
www.artofcnc.ca