开云体育

Austria is fine as well…

Hey, if it comes down to it, we can order a bunch and send them to Austria. *ahem* I mean Australia. --- Steve KC1AWV M17 Project

Hi! LW7EMN, Juan, from Azul, Argentina. It is nice to see some community build-up Thanks for the zero retries moderator! I had been experimenting with M17 for a year.

I hope these get off the ground.? Unfortunately, exchange rate makes them rather expensive here, but if I get a windfall, I'll add one to my list of (future) devices. -- 73 de Tony VK3JED/VK3IRL

As I said in my intro post, I have the following M17 hardware: Gateway: MMDVM (both hotspot and modem with external radios). Client/user: MMDVM with M17Client and 9600 capable radio. Module1 with 9600

I cheated with the cable, as I said, because I knew the Module17 was pin compatible with the BI7JTA and Repeater Builders MMDVM boards, for which I had a cable on hand.? You can order just the cable

New to M17 with no M17 specific hardware yet. Still in the observing and learning mode. Steve N5QC

CSI has a pre-release announcement for two M17 HT radios and are accepting orders. https://www.csi-radios.com/radios/connect-systems/ I have no affiliation with CSI, but I hope these radios "fly off

Hi, this is Werner OE1WRS. I have only M17 RX capability with SDR++ and Airspy. Can someone post details on the proposed / in development solution for replacing UT-1xx DSTAR boards with a M17 capable

Than you all for joining this list! I hoped for maybe a dozen of us and we’re comfortably past that. I’ll be at least another day before I can actively participate here as we visited our daughter

Thank you, Tony, for the description of your efforts for M17. I've been circling M17 RF for over a year and am on the threshold now with a Lilygo M17 module 0.1e and a cable that's almost ready for

Hi everyone, just a quick introduction. Tony, VK3JED here, located in central Victoria, Australia. I've been following the M17 Project since late 2020, when I discovered it by accident via one of the

I am big on configuration or setup sheets to document my working (and often failed) configuration(s). They often become good templates for other users to start from. Steve N5QC

Steve: Thanks for this. The M17 developers have existing, well-established channels of communication such as Discord. Agree on all your points. Thanks, Steve N8GNJ [email protected]> wrote:

Priming the conversation, please confirm, correct, add, etc. Group is to be use and user centric. I think this is N8CNJ’s point in forming the group. Development, while interesting, is to be kept

Hello you first four brave new participants! Apologies that I’ll likely not be “present” for the first few days of this list, so feel free to talk amongst yourselves about M17. I’m