开云体育

[AMD Official Use Only - Internal Distribution Only] I'll get one simple thing out of the way first - with a digital drive the fastest "slew" is 16x or ~4 degrees per minute, which is still really

Hi, I recently purchased a well taken care of used G-11 mount with HD tripod. I attached the mount to the tripod, attached my modest scope, balanced the mount, powered up the system. The mount will

Arguably the G11 isn’t quite large enough – it’s rated for 50lbs IIRC. If your rig weighs 60lbs or so then a G11T (75lbs) or a used Titan (100lbs IIRC) would be more the thing. David

G11 will handle the RASA with EASE..............Like it was made for it. leroy , G8, Two G11s, Titan Sent: Saturday, October 24, 2020 8:35 AM To: [email protected] Subject:

Hi folks: First time poster here but I have been reading for a while. I have been considering a Losmandy mount for some time now and after problem after problem with mass produced mounts, I want to

Hi Bryn Sorry there is not an RA Extension for the G8. If you upgrade your RA to the GM811, that option becomes available the G8 is already so small and lightweight [email protected]>

Is there an equivalent of the RAEXK for the original GM8 without the tucked in motors?

Glad you like them, love to do them :) Brian -- Brian Brian Valente portfolio brianvalentephotography.com <http://brianvalentephotography.com>

Thanks Brian. ? And thank the gang for the new YouTube videos that came out today. ? I know a 5 minute video takes hours to produce, but the more n00b friendly, new mount owner focused videos the

As I read it... The "K" version adds a spacer under the clamp (Saddle Plate). 0.6" Gives a little lift there for the Non-Tucked motor versions. (older versions) I didn't need that with my GM811G, so I

You can polar align accurately with just the main scope, a DSLR and a piece of clear tape with a pinhole, no computer needed.? Assume that the RA axis is roughly aligned with the NCP and that the

I actually have Sharpcap Pro and in between clouds this week I have completed a rough polar alignment using the drift method.? Not perfect yet but hoping to finalize it this weekend, based on any

Just added a couple pic of the sun and my GM8 hybrid mount.

Hi Mike when you order from that page you will receive the correct RA Extension kit. For a new G11 mount you'll need the RAEXT The two kits are identical, except the "K" version has an extra spacer

Hi all, With all the backlogs, I'm trying to ensure I don't order the wrong part and then have to go through an additional backlog to order the right part.? ?I'm not 100% sure what the difference is

Hi Rick, I tried APT, but I had troubles running it, so I eventually drifted away. Even NINA has been a hard sell to me. I need bone simple. And Meridian Flips were always a PITA. However, I did

Thanks Carl! About the license, personally I'm just in it for the hobby, and I'll freely share, but I'm sure that there are others that want to retain their rights to the photo. Having said that,

I’ve tested the parking several times. I know if I don’t have the CWD set up in the Gemini then APT commands a straight park command the scope parks right then and there. funny thing is Gemini

I bought a Polar Scope for my old mount, but wasn't impressed with it. Since my whole reason for looking up was to do AP, I use my Laser Pointer, Guide Scope, and Main Telescope to do the looking for

Nice one Jamie! Many thanks, as I was recently discussing an Astrobin Losmandy group I created, your picture allows me to test telescopius as an alternative. As per respective copyright conditions,