开云体育

Hi Warren, I have a GM8 and G11 and just started getting the ASIAIR-PRO ready to test under a real sky. I had been using the G11 with the usual cooled astro camera and autoguider with a Skull Canyon

I have a GM8 with a Gemini 1 which I had kept for the ability to use with shaft encoders. The problem is the Gemini 1 only supports 10K tic encoders and modern encoders as sold by Astro Devices for

Highly slippery is always better if you can keep in in the right place and it doesn't migrate much. SuperLube does just that and stays soft at low temps with low startup torque. Just read the TDS ASTM

Support for high resolution axis encoders would be a great new feature! :) When done well, these could eliminate the need for PEC and, sometimes guiding. Regards, -Paul

David I think if you read what I said it’s true. It’s all the encoders we have available for the Gemini which are the motor encoders. Brian david.partridge@...> wrote: Brian Brian

No, axis encoders aren’t included, only motor encoders. David Sent: 04 October 2020 00:54 To: [email protected] Subject: Re: [Losmandy_users_io] Encoders, yes or no? Hi Dave

If you are using a Gemini controller, you have the motor encoders. So the question is what’s the point of axis encoders – it buys you the ability to use the mount in “push to” mode while

Hi Stosh answers inline below: *I have to look at the details when i'm back at the shop, i'm not sure if that's correct, but i'll talk with tanya on this* *The MA is part of the tripod, so it

Hi Dave This is a fairly easy one - encoders are included as part of the mount There is a port F that was designed for the idea of future external encoders but that did not come to pass. So the

I’ve had my GM8 since the 90s. At the time there was no Gemini goto unit for the Losmandy mount except for a third party after market mod. The encoders that attached to the RA/Dec gave push to

Thank you for responding to my questions, Brian. My question about TTL was prompted by the section on the website, second to last item, under *DRIVE ELECTRONIC GEMINI 2 GOTO* *GEMINI 2 GOTO

Hi all, thanks for the responses. Brian, I tried the configurable mount section, and the price difference was $5, even though the text said save $200 and $55.? ? ?This first price is the G11G,

All, Sorry for the barrage of newby questions, I am working my way through the manual to get to grips with all the features on the G11, my first motorised eq, tonight's topic of interest is

One night I was testing my mount doing a No Meridian Flip imaging session. (Something Scott Losmandy mentions about the RAEXT) As the mount came upon the warning beep, I reset the limit. I did that 3

If you are using the Gemini virtual controller, you could try using the Rev RA and Rev Dec check boxes just below the 4 diamond touch pad. (Reverse RA and Dec) Other than that, I've used Stellarium

Hopefully some of the Observatory Guys and Gals will weigh in on this. Even when I left my mount set up, I always did a polar alignment at start up. My logic was that things always change from night

Prepare for a belly ache... For going on 6 years now, I've used a cover that came with a Bar-B-Que, And a 32 gallon dome. What the hell is *a 32 gallon dome?* OK, you buy a cheap plastic 32 gallon

Hi everybody, We have installed one month ago a telescope in an remote observatory, before this we haven?t got any problem with the mount (Losdmandy G11 Gemini-1), but after we installed in the

Strange as CdC is all I ever use with Gemini Ii and have never had issues? No special configuration apart from setting location and time the same as Gemini (I set to UTC with no offset). Keith

Hi again Tony before you reset your limits (your other post), I suggest you get this figured out. I tried CDC and was able to connect but it also appeared it treated my losmandy backwards. I