开云体育

Hi, Just joined this group and would like to solicit your opinions on encoder resolutions for the GM8. I have picked up a set of used encoders from a GM9 and retrofitted them on to my GM8. The

"Robert Montgomery" <rmm@...> wrote: Hello Robert, I don't understand the problem. I'm planning to purchase a G9.25 OTA to use it with my G11, will I have problems to install the tube on

Robert, My feeling is your 9.25 should mount fine. If you were told you would have to mount you 9.25 upside down, I am betting you can go the other route like I did. I can carry my OTA around by the

So, uh Herm... If you don't find one, would you be interested in splitting a pair? I just replaced the connector on my RA drive after my G11's maiden voyage after I <ahem> forgot to tighten the

Hi Bob: Try Wil Milan at http://www.airdigital.com/astrophoto.html (if he hasn't already replied to you), his e-mail address is on his website. He spends time mostly on the APML and Takahashi lists so

If you bought a pair, I need one for the RA motor..you know, so its not smashed by the head when you forget to tighten the clutch!..Oops! Herm Astropics http://home.att.net/~hermperez

Hi Bob I just got my plate and it works the same way with the C9.25 Alex Robert Montgomery wrote:

Gregory, Thanks for the info. I wonder if the hole pattern is the same on the C9.25? The C9.25 also weighs a bit more than the C8 OTA (about 22 pounds I think), but hopefully not enough to make a

Robert, I too was told I would need to mount my C8 OTA upside down on my Losmandy Dovetail. I discovered otherwise. I used the standard dovetail for the G-11 and was able to mount the OTA rightside

Has anyone mounted a C9.25 using the Losmandy dovetail? If you put the DC9.25 on the top of the scope you have to flip the scope upside down in order to attach it to the Losmandy dovetail. I'm

Yes, it does depend on what "local" means on the Internet. Dick Smith Elctronics sells them. Greg Crawford

"Ace Hardware" stores carry a 6 conductor splitter (part # 3108396) in the telephone accessory section. I hope this helps. Cal Sandfort Allen Maroney wrote:

--- Allen Maroney <amaroney@...> wrote: I guess that all depends on what is "local" to you. Here in California, Fry's Electronics carry the 6-conductor duplex connectors. I tried Radio Shack but

I'm considering a autoguider to use with the G11. The hand controller cable uses a 6 conductor cable and I assume that a st4 uses the same. I have found plenty of standard 4 conductor phone cord

Thanks Herm. Brian Radio Shack to head..you only one gets secure if

Neal, I printed your image and it looks photographic (no pixelation) at the 8*10 print size, that st8 rocks!.. "Neal Barry" <nbarry@...> wrote: Herm Astropics

You can also wrap the cables in plastic coil protectors (sold in Radio Shack to protect cables, semi rigid), route them and attach then to the head..you only get in trouble when the cables are

Steve, Thanks. I'll give it a try. Brian should put it, turn salt and extremely well mount the helps. With

covers..they in Herm, Yes, I do have the DSC encoders. I'll give Pocono a call and see if they have them in stock. Thanks, Brian.

Hello People, I am a G-11 newbuyer from Brazil. There are another Latin American in the group ? Thanks Jose Luis Machado