开云体育

Hi Bret just typing in the IP address isn't going to work. your Gemini isn't getting its ip address from your router, so something isn't connecting correctly Make sure your router is fully powered on

Hi Folks, I'm trying connect to Gemini via ethernet to see if that resolves my issue. ?I have Gemini connected though a WiFI adapter to my local home network, but I'm not able to connect to Gemini.

Hi Mengan, These encoders are for use with a digital setting circles computer. They cannot be used for guiding. If you have a guiding issue please post what you are using and what the problem looks

discover that TVC only works when the Speed is set to "Guide". Yes, that's correct Sorry i re-read the op which I thought was guide mode, but i missed the center part. TVC only affects guide speed --

Brian, I once tried adjusting the TVC value for this very issue, only to discover that TVC only works when the Speed is set to "Guide". Can you confirm TV works when speed is set to "Center"? -Bill

I would also suggest replacing the coin cell in the Gemini-2.? If somebody told me their Gemini-2 would partly boot up and then get hung, that's what I'd think the problem is.? It's possible your

Jeff crossing Ra/DEC cables is an oldie but a goodie that everyone does, me, more than once. As for connecting to a computer.... please read Gemini FAQs ( https://gemini-2.com/index.html ).? Start at

Mengnan - I believe those encoders are used with DSC devices for visual push to capabilities. I don't believe those are accurate enough to assist in ap guiding. There exist more accurate ones, but

At this point I would have no idea how to run my mount with my PC. I have crossed my Dec and RA but didn’t have any issues except for some confusion when up/down turned into left/right.

Maybe if I left off the inexpensive part and just put “money is no object” instead? It’s all okay. We generally get what we pay for.

Thanks Michael! I appreciate your input.

Have anyone tried the encoder kit? https://www.astrodevices.com/shop/index.php?product/page/16/Losmandy+GM8%2FGM11+Encoder+Kit I recently bought a G11G. I wonder if the encoder kit will improve the

Hopefully you have good hand eye coordination? As mechanical things go a G11 is pretty damn simple. We aren't workin' with watches here. Three years isn't a long time in the life of a G11, OTOH, 30

Hi Michael button, the star moves instantly, but when I press the north or south button, there is about a 1.5-second delay before any movement. That sounds like backlash. If you want to reduce that

Hi jeff depends upon which vet Gemini 2 you have, I suspect G2 mini. ?So one port , the Au ?th o guider is 6 pin the other Port F is 8 pin Yes it’s possible to fit a 6 pin plug in an 8 pin socket.

Jeff, Going forward it's probably best to block the jacks. Instead of jack ends or tape, I use the rubber inserts shaped like the sockets. Not sure how you can get the HC plug into the other jacks

YES.you are. -- Chip Louie Chief Daydreamer Imagination Hardware Astropheric Weather Forecast - South Pasadena, CA Astrospheric Signature (

Trivia question.? New GM811G, my first Losmandy mount although I have a lot of experience with other mounts.? Visual observing session with C8 at 110x. Go-to and tracking are good. Hand-box-button

I think Ports E and F are serial ports similar to the HC port, and the ST-4 autoguider port is just switch closures (probably really FETs) and wouldn't supply power or do damage to anything plugged

It may have just been coincidence that the HC stalled out after plugging it into the wrong port. It might have happened anyway. I have had more than a few mounts glitch out or die on me in the last