On 1/24/2021 4:17 PM, Michael Herman wrote:
Russ,
A few things can cause this behavior.
First of all, check the motor cable both ends for any corrosion of the 6 pins at each end.? I try to polish those connection pins up.
Likewise the female pin contacts inside the connectors could be oxidized.? You might be able to put a thin round (rat-tail) file in and make the contacts better.
So try that first.
I would be VERY careful using a file. Most contacts are plated and using a file on them will very likely remove some plating. This can expose the underlying base metal which will then corrode, making things worse long term.
Paul
--
Paul Goelz
Rochester Hills, MI USA
pgoelz@...
www.pgoelz.com
