开云体育

VA3SYS and KC9WIB, thanks for your input, together this solved my issue. I found that the “ RF Menu 07 submenu DIG , mine is set to -19 to -24”, on my TX-500 we’re all positive numbers, I did

Wow! Holy Mother of USB sound this works great - somehow, I never saw this! thanks now my settings are more reasonable

Had the same issue with multiple rigs, you need to disable AGC (Automatic Gain Control) in windows. Here is a step by step guide

Rig: RF Menu 07 submenu DIG , mine is set to -19 to -24 you can also try reducing the sound slider for usb codec/PnP on the PC- mine is set to 1% I'm tempted to jump or cut the ATT jumper can't recall

Hi I am getting too much audio out for WSJTX from my TX-500, as the receive bar is always at full scale of 88db. Where in the Menu of the rig do I reduce the digital value of audio output to my

Maybe the Ft-818 is the way to go My Icom went tango uniform fox trot as well Kenwood bring out a qrp rig John VE3IPS -- Sent with a Palm Pilot. Ve3ips.wordpress.com Radio: it's not just a hobby, it's

gonna have to empathize here... i always understood that HRO was stand up, but several vendors have exited their distribution chain over the past couple years (another domestic qrp rig manufacturer,

I sent my audio amp defective tx-500back To HRO over two months ago. Due to HRO shipping it to the wrong address for repair and tech illness it took almost two months to be returned to me. In this

I'm in the process of building a tiny circuit board that will bring out all six of the mic/spkr jack pins, have a small ptt button and a trrs jack for any mobile headset with in line mic. I'm just

You might consider the W2ENY Dual Ear Headset for the TX-500. His store front on ebay has it ( https://www.ebay.com/itm/353221092789?hash=item523d9e25b5:g:AGwAAOSwLzFffdir), but it's a little cheaper

I love the Heil BM-17 D-IC with the w2eny PTT/mic/Sp cable and trigger , not from the local store though

I was using RG-8x at about 30ft but recently purchased the PackTenna RG-316 35 ft cable to lighten my pack weight.? I have that much cable length so the feed-line can be my EFHW counterpoise. Then

This has been a well discussed issue in prior posts.? I've had a feature request submitted with Ham Radio Deluxe to add the TX-500? as it's own interface driver for months. The root issue is that

Hi I got the answer! Ferry at HRD responded and told me to change the MODE in WSJTX from Data/Pkt to NONE, that fixed the problem and now I can transmit fine. Glad that he knew the answer. -- Glen -

MARS Mod available ---------- Forwarded message --------- From: Lab599 support <support@...> Date: Thu, May 5, 2022, 6:00 PM Subject: Re: (Без темы) To: Mark Springer <wl7bct@...>

Bumping this old post to the top: Any updates on a MARS mod for the TX-500? Thanks! Luke - AD0KI

I’ve seen this with JS8 as well. I found that I have to select digital mode on the TX-500 first when acquiring the radio or it won’t see it. This using a digirig however. Sent from ProtonMail for

Just tried the same setup, HRD with TS-2000, HRD set to USB, wsjtx settings same as yours, when i hit tune button mode stays in DIG as set manually on the tx500. If i switch mode on HRD, mode switches

I did find and change the rig to TS-2000 but still no change on that it still switches the rig from DIG to USB each time that it PTTs the TX-500. I have to manually change back to DIG , but then it

Tom, check is no TX power on all bands or only on 1-2 bands? One time I played with telescopic antenna on 28MHz and later discovered that there is no output power on 24-50Mhz. In spite of protection I