?
First, I'd go through and check the small grey
RF?coaxial connections to ensure they are connected and connected to the
right place. The service manual can help with that.
?
Then I'd check that?the other DC and logic
interconnect lines are roperly routed to the right connectors.
?
Do you have a separate receiver you could use to
see if there is any HF RF being generated..?
?
73...Jordan VE6ZT
----- Original Message -----
Sent: Thursday, February 22, 2024 4:06
PM
Subject: Re: [Kenwood-Amateur-Radio]
TS-690S transmits on 6m but not on HF
And replying to my own post, the TS-690S did transmit at full power on the
HF bands before I started taking it apart, so I’m thinking that I either
misconnected something or failed to reconnect something. Given that the
connectors on the boards are for the most part different from each other and
that the wiring harness puts the proper connectors very near their mating
connectors on the PCB, I think it would be difficult, if not impossible, to
accidentally misconnect the connectors.?
That being said, I’m still very receptive to any
suggestions!
73,
Stan N6BYU
