开云体育

I am having this same problem also. First time working with "Build A Pi". It either looks like the onboard wireless is disabled. Keeps saying no wireless interfaces available when I go to the

Jason, I tried it in Digital, Packet, and FM. Also changed config to reflect 2M=FM, and then =PKTFM to see if it made any difference, and again cycled through every mode. I thought I had a lead on

That was it, I used my cell and connected to 10.10.10.10 and was able to log in. It's funny something that I know. I forgot. That you for the reminder. later 73 *Don Poaps* *New Westminster,

Is it something simple like maybe you didn't first connect to the hotspot with your device first? ________________________________ Sent: Sunday, June 7, 2020 3:50:32 PM To: [email protected]

Grant, What "mode" is the radio in. I ran into this same situation yesterday with another ham. Windows box, signalink, 857D. He was trying ARDOP but the symptoms were the same. Had red PTT on

But strangely, FLDIGI will key both Signalink and 857 if I xmit or tune on it.

And now I’m back to the radio not keying. Signalink will illuminate PTT to red, but it won’t actually key the radio (for AX25).

wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 10.10.10.10 netmask 255.255.255.0 broadcast 10.10.10.255 ether dc:a6:32:68:10:1c txqueuelen 1000 (Ethernet)

Mobile Pi update. I'm having issues with the Hotspot Tools. I forced Hotspot and I see 10.10.10.10 in conky. I add the Hotspot Ip address in VNC. It tries to connect and then times out. I can connect

Interesting thought. I run that command so I can do kiss attach, or I just run Direwolf from the HamRadio menu Jason set up. Also, I wouldn’t know where to put it in Direwolf config. I’m going

Have you added deirwolf -p -t 0 in the Deirwolf config. I had that issue when I first started playing with Jason KM4ACK scripts. 73 *Don Poaps* *New Westminster, BC* *VA7DGP DATA* *VA7QU

I've order 1. It should here around the end of July. I'll be using this one for my HF Grab and Go kit.ing Looking forward to the non-raining season. 73 *Don Poaps* *New Westminster, BC* *VA7DGP

I haven’t tried a P2P yet - I’ll see if my DEC or EC can help me out with that. Attaching a video to show what I’m still encountering.

Jason, No it will not, wasn't working out of the gate after the new Buster and B-A-P V3. Dwayne ________________________________ Sent: Sunday, June 7, 2020 7:45:21 AM To: [email protected]

John, That feature is written into the dev branch of Pat Menu along with a few other new features. If you want to try it now close Pat Menu & run these commands: cd ~/patmenu2 git pull git checkout

NICE!! Glad you have it up and running. Yesterday, I ran the new 8gb pi 4 for about 6 hours in the field. Outside temp was 94F. I didn't keep tabs on the temp of the pi but I didn't have a failure :-)

Hey Dwayne I don't blacklist the internal card. Occasionally with apps like Pi-APRS we use the internal card for sound alerts. JS8Call can also use the internal card for alert sounds. Try removing

Just a thought. My setup, not trying to use a signalink, only keys for a fraction of time for the call out. Is it sending a full call out? Have you tried a P2P connection to verify beyond the initial

Okay, I’ve now got the radio transmitting - but SignaLink only keys up for a little less than a second. I’ve verified with a different radio that data is being sent, but again it appears the

And... just like last time, it's working. All I did was try the install and this is what I got: " pi@NE5U:~ $ sudo apt-get install -y conky Reading package lists... Done Building dependency tree