开云体育

Sold out? https://www.raspad.com/products/all-in-one-raspberry-pi-display?variant=21291078910070

I want one. I wonder what the input voltage is from the power brick? I also wonder if the GPS issue with USB3 would be present and if the GPS dongle would work in the case. Don

Looks great!!

Could easily fit a UBEC inside to power it. Add power connector of choice and you would be up and running.

Cool, although I won't be throwing away the pi strapped to my radio. Carrying this as a control surface however, would add redundancy should you have a failure out in the field, especially if you add

This is a bit of an old topic but I wanted to update the group. I recently purchased a Signalink and my previous issue is gone. WSJT-X works just fine with my MacBook Pro or my Raspberry Pi. I think

has anyone setup aprsdroid with direwolf and yaac using a signal link as the tnc running on a pi3? Tim

Hey there, just saw this. I actually got 2.51 to run using nohup. I’m actually using an an old Sony all-in-one computer as the monitor for the zero (it has an hdmi input).

So, I got a Yeasu FT-890 with the USB Cat controller, on a Raspberry Pi-4, 4 gig, running Build-a-Pi. I was able to connect to FL-Rig 3 times, and now it keeps saying the radio is not responding.

That looks pretty cool! -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack ) | Store ( https://km4ack.square.site/

RPI4 tablet https://youtu.be/XPYfpia8OgE NI0P Brian

Try using the terminal or ssh and enter the sudo raspi-config command.? Then:1. Go to Boot Options, and change to Boot to console.?2. Go to Interfacing Options, enable VNC.Back out to where you can

My OCD got the best of me. Went back and used stepped hole saw to just make one big opening and put fiberglass window screen over from the bottom. Saw wasn’t quite big enough to completely eradicate

I set mine up at the max resolution. You can always use pinch zoom on the tablet if you need to see something a bit larger on the screen. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip

Here's a good resource for covering the holes https://www.goldmine-elec-products.com/prodinfo.asp?number=G24026

Thank you, Stan. That’s very clean. 73 de AG7TX David Thompson, AG7TX Jack of All Trades Master of None dbthompson@...

Here are the pictures if the inside!!

Alternatively, if you don't have the Pi set up to auto login and boot to the desktop on startup, then you will have to SSH into the Pi to log in to continue the boot up. You should then be able to

I have an older Netgear router, and it shows connected devices when it feels like, and leaves them off when it feels like. They all work, but they just don't show up in the list. I use a windows

I've set up several Pi 4s and 3s using a monitor and keyboard to do the setup, and then switching to headless by just unplugging the peripherals. They booted fine and VNC and SSH worked without