开云体育

Tried Hotspot tools show hostname and password empty -- Loyd C. Headrick WX4LH <http://wx4lh.com>

Ok did the patch for hamlib. It installed I restart rpi And start flrig Then i started pat menu and start ardop modem. Ardop off red turned to ardop on green Rigctl off red went to rigctl on green But

Here is what I get: pi@AK4NG-pi4B:~ $ rigctl -vvv -m 1 f Opened rig model 1, 'Dummy' rigctl_parse: rig not open...trying to reopen rigctl_parse: RIG_EIO? main: i/o error main: rig_close retcode=-1

Thanks, that works George - AK4NG

Ok did the test and screen say Opened rig model 1, ‘Dummy’ 14500000 But rigctl in conkey is still red and off What is interesting is that wsjtx, flrig, jtdx,js8call and cqrlog all work. But i

I am running 3.08 and I havent had a green light at all

This is a pretty old version of hamlib. 4.3 is the latest version. You might try updating to a more current version. You can use the BAP update tool to update. Both of you should run the following

I just remembered the other thread where you had trouble with the WiFi. If you used hotspot tools to disable the hotspot, this would explain the hostapd.service not being available. -- 73, de KM4ACK

Do you have a green blinking light on the GPS itself? If not, then the GPS doesn't have a fix. Which version of BAP are you running? -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

The answer is in this video https://youtu.be/Uy6xbC0Hiew Note: the menus have changed since the video was done but the principal is the same. There are also other posts on this forum that include

Try using Hotspot Tools instead of manually using the terminal. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack

I'm running a pi4 8gb The error I keep getting is a "gpg no public key". I have followed the?https://youtu.be/YIIC-iT6H-s video and haven't been able to get my GPS to work at all its the ublox7. I

Did a brand new install using BAP on www Rigctl —version Then it reply with rigctl(d), Hamlib 3.3 Am i using the right BAP version? Greetings from the Namib Pieter Jacobs De V51pj 73

Running a new Rasberry Pi 4B 8gb with the OS: PRETTY_NAME="Raspbian GNU/Linux 10 (buster)" NAME="Raspbian GNU/Linux" VERSION_ID="10" VERSION="10 (buster)" VERSION_CODENAME=buster Problem: As long as

rigctl --version rigctl Hamlib 4.3 Wed Sep 01 02:14:39 2021 +0000 SHA=5a6134

yes used Build-a-pi -- Loyd C. Headrick WX4LH <http://wx4lh.com>

Which version of hamlib are you running? If unsure, run this command: *rigctl --version* -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter (

Worked great, thank you.

Did you use Build a Pi to install the hotspot? -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack ) | Store (

All patches had been applied.