开云体育

Running "git pull" says I'm already up to date. Based on the notes in the getardop script, it looks like ".getardop-cron" should be the script used in the crontab. I made that change, as a test... I

Hi Kevin In rereading you response here, I may have stumbled on something that has been happening to me. I use an 8 inch display and stand with Pi case from Vilross, as shown

In yours, I notice you are using port 8778 but in the document he uses api.winlink.org port 80. Which one is correct? I rebooted and it still doesn’t show up and it doesn’t show up on APRS.fi

Hi Could be, it is older, metal case small and looks kinda like a mouse usb controller. I do know on PC's it works fine, could be the stronger voltage, where the Pi is powered by 5.1 volts. But

I had a couple of older 16GB PNY drives that pulled too much power as compared to most drives (they had a rotating metal cover or sliding plastic sheath) and would only work consistently on PCs. I

Great catch Brian! I had overlooked that as well. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack ) | Store (

Pat Winlink prior to version 0.12.0 stored the mailbox data in ~/.wl2k/mailbox/ They changed where the mailbox data was stored beginning with 0.12.0 to the directory mentioned above. -- 73, de

You are probably using a slightly out of date version of Pat Menu that had an error with the latest Pat Winlink (0.12.x). Run these commands and it should resolve. *cd ~/patmenu2* *git

Thanks. I will check it out. Best 73, KB5WCK ________________________________ Sent: Thursday, December 16, 2021 8:22:51 AM To: [email protected] <[email protected]> Subject: Re: [KM4ACK-Pi]

I believe you are talking about the Winlink Gateway. If so, check out this section of the Winlink Gateway video. https://youtu.be/F_s4zIUIfew for setting it up. The information should update on the

Hey Anthony, You might try posting this to the FLDIGI forum. Avid users hang out there and might be able to give you some suggestions. It's been a while since I have used FLAMP but it's on my to do

HI Kevin Format of drive is Fat32 I believe and it has worked in the past. This is not the first time I have had this problem with this drive. I am not sure if it is the drive or what. I think I

Thanks Tom, Got it going.

No, it wasn't lighting up. I'll give that a try and report back. Thanks! Beau W6ERR

How is the drive formatted? Does it show in a terminal window and run: df -h Usually you can safely unmount a drive using in a terminal window: sudo umount /dev/sda1? # and sda2 and however many

Hi I have had a problem a few times. I may get cleared up if I reload the OS onto the mico SD drive, I use Buster yet. What happens is that when inserting my PNY 16GB drive I use to save files I

I found the script "getardoplist" in /home/pi/patmenu2. Inside it says: #Two versions of this script exist. One for manual downloads and #one for cron downloads. The one for cron has no YAD

Where should I look in the file system for the outbox location? I did find archive, in, out, sent in this path... ./home/pi/.local/share/pat/mailbox/K4GMV so I then searched the entire system to

I would say hop on Toads discord and talk to Joseph. 73 N5SKT [email protected]> wrote:

Thanks for the picture! Now this is even more intriguing. Moonbounce with that little yagi? and low power.I have got to learn more. Jim