开云体育

Thanks Jason Intended use:? interoperate with local emcomm using wl2k email on 2-meters at 1200 baud. Most people use windows machines; not me, so I'm trying Pi+PAT+direwolf. In FLRIG, I just changed

First things first. Let's see if we can get FLRIG working by itself. Select the Bridge Controller "A-IF-00" Leave everything else at default in FLRIG. Now see if you can change the frequency with

Hi Everyone. I'm a newbie here ... just got a Pi 4B set up and many of the BAP offerings installed (hamlib, hotspot/HStools, direwolf, AX25, pulse, flrig, PAT, PATmenu, packetsearch, etc.)? This

Glad you got some resolution. Hate that it was a hardware issue instead of software. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter (

Hi i dont know if any of you have seen this error before. I was sending a Check In form as i have done before, but in this time i got this error. Does anyone have an idea what i may be done wrong? I

Sorry for the delay in getting back to this, the day job got in the way. Good news is that I believe that I figured it out by barrowing my daughters windows laptop and installing the drivers for the

I am having the exact same issue over the last week… incredibly frustrating! Did a fresh build of Build a Pi, but that didn’t resolve anything… have you had any luck recently?

Can't speak to the performance of piardopc (I haven't tested lately) but there was an issue after a new Linux kernel release that caused it to lock TX in Bullseye -

The current version (1.0.4.1mBPQ-Debug5) of piardopc may have a performance issue.? After building an Rpi 4b Bullseye 64bit (9/6/22), installing BAP v2.10.0 along with PAT (v0.13.1).? I configured

Okay, I figured out for my issue. My Isotect portable monitor has two hdmi ports, but I've always used the same one with my Buster builds.? Thinking it was the hdmi cables, I tried all kinds.? I

Thank you that worked perfectly! Now if I could only figure out how to mount my NAS to BAP I'd be in great shape! Rich

well I see some indication when searching the net that others have it running on 64bit linux but maybe the arm 64bit implementation does not work.I may need to go with a 32bit install.

Thanks Steve for your kind words. Michael Bridak, the author of FDlogger is a great guy, easy to work with and very responsive to emails. In my case, when I first tried FDlogger for Field Day, I had a

I ran a BPQ node years ago running TNC-X and SCS-PTC tnc. On John Wiseman's site there are samples for setting up various modes. BPQ.cfg is the file you edit porting to the modes you want to run.

Run the following command: *sudo nano /usr/local/share/applications/bap.desktop* and paste the following information: *[Desktop Entry]* *Name=Build-a-Pi* *GenericName=KM4ACK Build-a-Pi*

An educated guess says this is a result of running the 64bit OS. I don't know if linbpq supports 64bit. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack

I'll leave the HF recommendations to someone that operates an HF gateway. I can point you to this group /g/bpq32/topics where a lot of sysops hang out. -- 73, de KM4ACK YouTube (

Hi, ? I have the same problem with two different portable monitors. Found that the amazon basic cable was the problem with one. But the other one still doesn't work with the new cable.

Okay, I have a portable monitor that stays black with Bullseye, using a rpi4.? I pop in an sd card with buster and no problem, no black screen.? I switch to another portable monitor and no problem

Thanks Mike, you have a great site by the way!? Appreciate the step-by step on how you installed and use Field Day Logger (you should submit some of that info as a patch to the manual/install &