开云体育

I have some edimax from older raspies, which I want to use, the question, how to deactivate the build in wlan and to activate the external edimax, also to use Jason‘s mechanism to automatically

Principal no problem, but as it is the only raspi4 I have and the prices of a raspi4 actually is more than double the price as one year ago, I do not want to make a risk to damage ?

Use chrony and the GPS for your time syncing. http://photobyte.org/raspberry-pi-stretch-gps-dongle-as-a-time-source-with-chrony-timedatectl/ Works for most of my needs.. Kevin? -- KD9EFV

Equipment: G90, digirig mobile, raspberry pi 4 with 8g. ?Ferrite toroid is used to block any RFI coming from the usb c cable to the Pi4. ?I’m using the uBlox GPS dongle. ?The GPS connects within

FYI, while testing for another project, installed clean RPiOS-64, updated, and then attempted to run the Build-A-Pi set of instructions, and got a failure: pi@raspi4:~ $ cd ~ git clone

Jason - That fixed the ARDOP modem not starting. ?Tested and made connection on 40 meters. VNC Viewer is also working. tested HAMRS this morning and it runs fine.

For me, it's whether the applications that I need have a 64-bit build and, if so, whether there's a performance difference worth the effort.? Having recently backed out of Bullseye 64-bit with BaP to

Jeff, For TQSL, the latest version (2.5.9) installed during testing this morning. I did get the following dialog: Were you possibly confusing this for a new version of TQSL? -- 73, de KM4ACK YouTube (

I use any of a number of USB dongles for my Rpi4-8GB and Argone One V2 case. Most are EDIMax, or RaLink ET series, and work well at the 802.11a,b,g & n levels. I've only found one that runs well at

Be sure you are running the test on a clean build. If the build is a couple of week's old, it could introduce issues. I just built FLDIGI & FLRIG this morning on a Pi 4 without issue. ARDOP - there

There are mods out there to add an external antenna on the Pi to be utilized instead of the internal one.? It involves some pretty careful soldering and SMD work.? I've done the install on one of my

Hi David, Since you just started and haven't loaded anything yet, it might be easier to reflash the SD card. This will assure that the Pi user is in the correct groups and reduce the possibility of

I ran Update again, this time with all the flsuite. Same result.? I ran it again, just with flrig and fldigi selected.? THe file flsuite.txt was created, containing FLRIG and FLDIGI. It was compiled

as the WLAN using the Argon One case is very poor, I want to use a USB WLAN dongle. What do I have to do, that I can use the WLAN dongle for connecting to local wlan and also running as accesspoint

Hello Jason: I loaded the 64-bit OS and then ran the BAP beta installation as per your directions. Pi4 2GB and a 32GB SD Card. I installed all of the apps on you test list and ran them after install;

Hello all, Well I am a newbie to PI..? ?First Off I want to thank everyone who has contributed to this huge project!!! Especially Jason for for taking so much time and effort to make all of the

Build-a-pi install ran smooth on a new 64bit OS installed on a 64Gb SD card.? The Raspberry pi 4 w/ 8Gb on board memory. I have tested the following: FLrig - set up and worked Fldigi - set up and

I had installed the 64-bit OS a couple of weeks ago and ran BAP.? Flrig aand fldigi did not install. I hd to indtall js8call twice to get it to work properly.? Several attempts at BSP update failed

I'm not beta testing but running bullseye 64bit on rpi4 and rpi3 running fldigi and pat winlink. I haven't tried packet yet or any other modes. My gps isn't working on it yet. On Wed, Mar 2, 2022 at

I currently have a 64bit build of raspberry pi os on my 8gb pi 4. I believe it is a bit quicker than the 32bit version was. Install size of base system isn't much bigger if any. I I haven't done any