I'm not beta testing but running bullseye 64bit on rpi4 and rpi3 running fldigi and pat winlink. I haven't tried packet yet or any other modes. My gps isn't working on it yet.
On Wed, Mar 2, 2022 at 6:39, Ken Crouse
<k6kec@...> wrote:
Follow up after successfully getting BAP completely installed on the RasPi 64-bit OS:
I was able to set up Flrig and Fldigi, then operate WSJT-X, but no joy with Pat. Today I plan to put the 32-bit card back in and confirm all the settings then swap out to the 64-bit card in the event I¡¯ve overlooked something. ?Thought I went through all the steps, but when clicking Start ARDOP Modem, received the ¡°ARDOP failed to start¡± error message multiple times. ?After clicking O.K., then the browser opens showing ¡°This site Can¡¯t be reached¡± - 127.0.0.1 refused to connect and the URL line shows 127.0.0.1:5000. ? Settings process: ? Went into Pat Menu Settings and Rig Control is set to ¡°yes¡± and Pat Port shows 5000. ?The ARDOP Command line shows ¡°¡ plughw:3,0 plughw: 3,0¡± which are the same shown when running the command ¡°arecord -l¡± (card 3: CODEC [USB Audio CODEC], device 0: Audio [USB Audio]¡±. ?I updated had updated the Sound Card Set ARDOP PTT = true
Not sure what¡¯s driving the non-start, but will add more details later.
73, Ken NB6S
