开云体育

Make sure PulseAudio isn't open when you use Ardop. No problem on JS8call or WSJT-X, but ardop will not work if it is open.

It appears as though HAMRS will not run on 64 bit. It may only be available as 32 bit until the developer updates. If anyone finds a workaround, please post. -- 73, de KM4ACK YouTube (

/g/linuxham/topic/js8call_changes_vfo_a_setting/70138103?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,70138103 I found this but I'm running the new RPI OS PI3A+ via VNC 73 73 *Don

No. Both will not allow changing of VFO. If using FLRIG and PAT, the VFO changes. I need to get in mobile to see if it happens with FLDIGI. I didn't load FT 8 etc. I'm seeing the mobile and 40 m

Ok. In pat menu, click on quick stats and post a screenshot. In addition, open up the setting page in pat menu and post a screenshot of that as well. I am assuming that you already have FLRIG open and

I did try that with no luck w1mek

I am starting to dig into the 64 bit OS to solve known issues. So far I have resolved the issues with FLDIGI and Pat. What other applications have you found that won't work on the 64 bit version? --

BAP is configured to always list your USB audio card as 3,0 assuming you are only using one USB sound card. I have tested the latest build several times and it always reports as 3,0. Run the following

Open Pat Menu. Click on Manage Pat Winlink->Set ARDOP PTT. Change to "TRUE" and click Set PTT. Test the connection again. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

As long as the Pi is in range of your home wifi, it will auto connect to it. Once your home wifi is no longer in range, the pi will generate the hotspot allowing you to connect from your phone/tablet.

Are you able to change the frequency in FLRIG? -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack ) | Store (

Hello I’m running BAP on a pi4 and I can not get it to transmit , I am running 991a with cat cable for ft8/js8call with no issues ? When I go to run Pat it will ?not transmit? Any suggestions?

I had rebooted multiple times and that did not solve it. Instead, I reloaded Bullseye and used your Build tool to install FLRig and JS8Call. It works now. I still want to understand how to use the

Hi Everyone, I'm looking for a bit of advice please. I can't see my RPi SSID on my iPhone or iPad and therefore be able to connect when using the hotspot in BAP. I can connect fine using my home wifi

I notice that when I click on JS8CALL to change frequency like 14.078 or any other JS8Call frequency. Something has locked it. Click on 20 M and it goes to 20 and bounces back to 7.078. Unable to QSY

It's working but just can not connect to VA7PF or the next closest Gulf Island USA Winlink Gateway. 73 *Don PoapsNew Westminster, BC*VA7DGP DATA VA7QU VOICE *Winlink: va7qu@...

I have a feeling that the USB plug got pulled or moved in my small usb hub. It's not showing up in *ls -l /dev/serial/by-id* *I have to go out and check shortly.* *73* *Don PoapsNew Westminster,

I must have something wrong. 2022/02/14 17:29:42 Unable to get frequency from rig my-rig: dial tcp 127.0.0.1:4532: connect: connection refused. 2022/02/14 17:29:42 Starting HTTP service

This is a full BAP load on a Pi 4.

Duh!! I didn't even noticed Rig Control. Changed to Yes. I'll turn on the Xiegu G 90 and see if my 40 m Hamstick can connect to Ardop gateway. I always needed some one to look over my shoulder to make