开云体育

There is a chirp version on Debian Sid which is compiled with GTK3 and Python 3.9. I will look into their build scripts to see how is's made. -- 73 Daff, LZ1DAF

Are you running Buster or Bullseye? -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack ) | Store (

More than likely it is FLDIGI that is causing most of the growth with the swap file. Closing Conky should also help a bit with the swap but I don't think it is the major culprit. With only 512 RAM,

Python2 and *GTK2* for Chirp. I had to revert to PiOS Buster to keep it working. Ditto on Ubuntu. Where there are several work-arounds for Python2 to install in Bullseye, along with pip2, there are

Please let me know if you make progress. This is one of the few apps that I don't have running yet. I'll probably revert to installing via apt until we figure out how to get it built from source or

Great catch! I created an issue ticket so the next release will have the new card number. https://github.com/km4ack/pi-build/issues/348 -- 73, de KM4AC

Hello Jason, please disregard my email regarding mobi-connect.? I just noticed that there is a Mobilinkd connect button in Pat Menu and it appears to connect my TNC3.? Now I have to go about

https://www.theregister.com/2021/10/19/gpsd_bug_reset/

I would wait 15-30 seconds (about the same as boot up, in most cases) but it might be a good thing to poke a hole, to see it. Another option (on my 3D printed cases when I first started) I used a

Thanks, Kevin. That's good info that I didn't know. But my Pi4 is in a case where I can't see the LEDs. Jason's recent one-button shutdown video made me think it would be nice to add an external

The green activity light flashes 10 times (about a half second in between) then stops flashing when safe. If you have a Pi4, and you use the command shutdown -h now, it will power off the red power

I realize that the Pi shutdown process is fast. But is there some time 'safe' time period that I should wait after performing a shutdown until I power off? Tom

Also installed flrig You will need to apt-get install libfltk1.3 libfltk1.3-dev libping-dev libsamplerate0-dev then?./configure, make, sudo make install and make ldconfig as usual. I did this after

Hi Jason, My apologies for not responding earlier. If I use the Betalink version, I am able to login to the packet site. However, I cannot send or receive emails. If I type in the manual command line,

I installed wsjt-x from source on a fresh bullseye os install today. Here are my notes. wasn't much trouble. I downloaded the source tar ball from the Princeton physics site. I then installed these

With the new pi os bullseye I ran into a screen issue that I didn't have with buster. I have this lcd monitor I use with a pi 400

Interesting about changing the update interval. Where do I find that file? I am running Fldigi with no problem regarding speeds and such. However, with Conky in the background I have seen the Pi crash

If Conky is consuming alot of resources (proportionally speaking), you can also try setting the “update_interval” setting in the .conkyrc file to a higher number. Of course this means updates to

I have a rpi zero 2 w that works great with everything except Hamlib. Every time I try and run rigctl I get the following error Everything else is working great, and I’d love to get Pat up and

Pretty much everything that uses Python 2 will be DOA with Bullseye.? The default python in no Python 3.? While it is possible to install a Python 2,? the default commands python and pip run the