开云体育

Hi Jason, Did you check dmesg (diagnostic message)?log? That may give you some idea what is happening. From terminal just run dmesg (I prefer to add -T option to give the timestamp). There will be

On Thu, Jun 25, 2020 at 09:57 PM, Michael Lloyd I, too, am very interested in how to make this work. I built the kit, and never used it yet because of trying to get it to work. Will be watching. Thank

A good point Ben, I am running a 3.5 amp wall wart and pretty sure Jason was still running one of the MakerFocus Raspberry Pi 4 Power Expansion Board DockerPi Power Board 20W(5V 4A) (

Using the Pi4 for a field PC running on DC has its ups and downs. Sometimes more downs and frustrations as ups. Most of my problems is related to the USB connectivity of peripherals and equipment. I

Hi fellow hammies, The problems with the Pi4 is really weird. Some people reported leakage/problems between their HDMI and Wifi, other just described the WiFi module just as crap. I also have some

I would recommend checking the total power usage of the Raspberry Pi while running with the Drive and without the Drive. I've seen low power issues cause things like this. Ben

I have "re-built" my RPi hardware. The SSD is on a USB3 corded adapter. I have the u-lox 8 (2m USB cord) attached to USB2. When I plugged in the USB it did not sync. I checked gpsmon, nothing. I

Nope, tried but it seems I'm a bit too far and the propagation of 40m pathetic. Tried to contact North America and Europe but to no avail.

https://www.youtube.com/watch?v=7X38zY36xZs Hope all had a good FD and learning experience. 73, Dwayne N4MIO

cgps is usually frozen when I first run it after Conky freezes.? I removed the gps, Conky showed current info including grid square until the next time it refreshed.? When the gps was reinserted,

Good morning Jason, Had GPS working before.? Just after the release of Build a Pi v. 3.0, I moved my Raspberry Pi projects out of the house into our Travel trailer parked on our property, from there

Jason It may also be with one thumb drive that is better isolated than the other against RF. Again maybe you should try the external WiFi module but find one that is compatible with the Raspberry Pi.

Hi Jason I have so many issues with USB and Pi 4 that I don't know where to begin. It seems that the Raspbian buster distro is quite finicky about the USB devices. I cant even start my SSD with an

I ran into an odd issue with the GPS during field day that has me stumped. I plugged in the GPS, CAT cable, and sound card. Then booted the pi and everything was working as it should including the

After Conky freezes, are you able to view your GPS by running *cgps * I am curious if it is a Conky issue or a GPS issue. I have seen the GPS create odd problems with Conky before

Mitch: Thanks for the information. I had read that blog post over the weekend, but although the autor provides crucial information, I was unable to tie his ideas together enough to make the project

This feature is in alpha test at the moment.? I have been testing it and standard forms work great.? The developers are working to get it available for a beta test soon. -- --Bill AA6BD

From gpsmon -n tcp://localhost:2947 Unknown device> OAOA[A[A[A[A[A systemctl is-active gpsd active pi@raspberrypi:~ $ systemctl is-active chronyd active Bus 002 Device 001: ID 1d6b:0003 Linux

I have the same GPS. Sitting in the window sill it sees some satellites but not enough to lock all the time. It's in a a north facing window in a house with a metal roof :/ so I'm not exactly giving

I have the same one. It flashes but doesn't really work on the PI. I tried the Build a Pi and TNC-X Pi script. It's supposed to allow it's GPS to pull in Winlink Gateway which it doesn't. 73 *Don