开云体育

I have one of three pi's where it was upgraded to 3.0.8, but the updater tool is still under preferences. Not sure why, but they are all set up in different ways, so, I am not sure why this one didn't

Nope. FLAMP won't update on its own. I'll wait. I'm not knowledgable on compiling stuff...I can wait. And QSSTV? Is this the same issue as in the beta of 3.0.8? I thought that was fixed.? Thanks & 73.

There is currently an issue with FLMSG’s source code. That causes the updater to crash. Try updating FLAMP by itself and see if it will do it on its own. As for FLMSG you will have to wait until

Hi Jeff, That is not version 3.0.8 that is failing.? It is the FLMSG script that is failing on the update.? If you wait it will be fixed on a future update, otherwise Jason has a groups.io thread

(Not sure if my original post went through. Sorry if this is a duplicate.) I know there were some issues from the beta version of 3.0.8, but I did not download the beta and waited until it was

v3.0.8 is the latest version. to go directly to the github https://github.com/km4ack/pi-build Are you still receiving an error when launching the update tool?? If so, please post it. Thanks, Terry

Whether they came out with v3.0.9 or not, I still cannot find it on the github.org website. is there a link to it or anything. I cannot even find "Preferences" let alone 'HamRadio'. 73 de * KE5WCT*

Sorry for my lack of training, but where is v3.0.9 and how do I get from github into my Pi 4B? 73 de KE5WCT Mike

Vic -- Good afternoon (from France) I've just completed a KX3 GoBox that uses an internal Raspi 4 running BAP. It works well but I could do without the extra heat generated by the Pi inside the small

No worries Jason.. I figured it was a miss communication somewhere. I reinstalled everything and it worked.. The 891 is odd.. I'd had it working for a couple of weeks.. I turned it off.. I came back

Conky is displaying the grid square using this line from the .conkyrc file ${font Arial:bold:size=18}${color White}Gridsquare ${alignr}${color Yellow}${execi 60 cat /run/user/1000/gridinfo.txt | cut

Hello All: So, Terry's suggested link led to a post from Jason where he saw a similar GPS Some Err in Conky and used Update to reload GPS. This worked for me and removed the Some Err message. But, now

Got my Rpi 4 today from Amazon.?? Got it setup for headless operation and loaded KM4ACK's software and had no problems at all so far. Thank you KM4ACK. Jim KE0VVU

Thanks for the response. I figured it out about 6 hours after I shouted to the world. At any rate I have Buster up and running and just trying to figure some other things out. Yes I hope to get

Hi I think KC9CTP had a mistype there and meant 3.0.8, of course I could be wrong but I don't think they have come out with a new one just yet. Marty kd8bj

Well, ya got me looking. I have 3.0.8 running and cannot find a way to update to 3.0.9? So what do I do now? 73 de * KE5WCT* *Mike Wilson*

SOLVED: I went over to the GitHub repository and used that Build-a-pi script and that corrected the above issue. One thing that I did notice, was that the Gridsquare for PAT said that I had to run Pat

Interesting! I just ran Build-a-Pi, and it completed successfully, I see HAMRS added under the Hamradio menu, however, the Build-a-pi script is still located under the Preferences menu. ?? Any ideas?

I’d like to also be able to set BOTH ports for headless operation, but I’ve been unsuccessful, so I just use two of these with appropriate adapters. -- Don W6CZ DM07bk HDMI Dummy Plug ( http://4K

Thanks KM4ACK!? I'll check it out.