开云体育

The offset can be set in the .conkyrc file found in your home directory. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter (

I was able to fix the transparency by putting this in the conkyrc file. own_window = true, own_window_type = 'normal', own_window_transparent = false, own_window_hints =

I have the black box, but I do have the content. Just can't move it down. I fid move the task bar ho the bottom, but that's not a fix. wrote:

Watching this and the previous Conley question closely…my new 73Linux build on a Pi4 and also have conky overlapping the task bar and it’s also just a black box with no content. Adam, KM7N

I built a 73linux load on a new pi5 and the Conky box overlaps the task bar at the top. Not sure where I can change the code to move the box down. Any help would be greatly appreciated. Bob, W1RPQ

Built a 73linux load on a new pi5 and the Conky window overlaps the uper task bar. Is there an entry in the code that will move the box down? The ALTor CTL and mouse drag do nothing. Thanks. -- Bob

I have conky running on the latest version of bookworm 64 bit using LABWC. Add the followingthe following lines to conky.config section of .conkyrc: out_to_x = false, out_to_wayland = true,

has anybody found a way for the text to show colors.

My old PI3 failed after many years of good service. So I purchased a new pi5 (4 GB version) and installed Bookworm 64 bit version, bit of a nightmare not much worked. Now I have switched to 32bit,

You should change the line serial-device /dev/rfcomm0 KISS to something like serial-device /dev/ttyACM0 19200 8n1 KISS

Cool thanks, probably just the port line right? KM6QAQ Sent: Thursday, February 20, 2025 3:44 PM To: [email protected] Subject: Re: [KM4ACK-Pi] HOWTO digipeat with Mobilinkd TNC3 and RPi

I don't see why not, all you should need to do is change one line to point to the serial port used by the Nucleo TNC. 73, John WX0M

Curious if this can be adapted to the Mobilinkd Nucleo TNC serial DIY version? I running APRS out APRSIS32 and Pinpoint.? I believe the programs allow digipeating.? I'm hoping I can figure out

I've updated the procedure to work more reliably with Bluetooth pairing of the Mobilinkd. I've also written a Python program and added a section to automatically update the APRX configuration file if

Here's a detailed write up of my procedure for setting up APRX as a digipeater on the Pi Zero 2 W with a Mobilinkd TNC3 as the interface to the radio. 73, John WX0M

Hi, I have some trouble with direwolf, digiriglite on a Raspberry Zero2 When I try to transmit, the red led on the digirig lights on, but the HT does not transmit. Receiving works (sometimes) My

Hi, thanks to all. It works. DigiRig Lite now gets always the same id! ? 73, Stephan -- Stephan Forth DF6PA Mainz Germany

Thanks for this. I appreciate it. I’ll try to make that work. I just changed the port on my LinBPQ node to point at my VARA FM on a different machine, but having it all self contained would be

If the heavy lifting has been done with the script installing Box86, Wine, and one of the VARAs then manually installing Vara FM is a breeze. A simple download and install through Wine. If you can

Thanks. I see the app in there, bit I just noticed that it’s VARA HF and I’m actually looking for VARA FM. And the scripts look a little intimidating to try to edit them to point to the VARA FM