开云体育

VARA is a software TNC (there's an HF and a VHF version) which has throughput similar to Pactor 3 at a fraction of the cost. It's the most used mode on Winlink these days and also is what the popular

God I appreciate your guys input on this topic. I have tried and failed many times with this pi 3. originally got it to run a hotspot thing and either the hotspot or the pi was bad, I blamed the

George, Thanks for your interest in how I run my Pi's. For an overview of my two main setups, here is an article I wrote about them. This article is about my first Pi setup. My second Pi setup is the

All my PIs are stock. I run VARA on both the 4GB and 8GB Pi 4 with no problems or hangups. I also use an SDR with them and use OP25 for trunking scanning of our statewide public service network as

Mike: Very interesting all about your PIs. May you share something about the performance when using VARA HF or FM with your Rpi4?? Something about the disk used to get an aceptable performance (micro

I’m getting same issue on ArchLinux. Alsamixer says no capture. I’m receiving audio and rigctl works fine. -- -WA6L

Just like Brian Dale, I too have several pi's (honestly I have lost count - somewhere between 6 and 10) running mostly on 3B+ pi's. They all run fine connected to my wifi and without wifi. I have run

Same here gave up using an old laptop now Lee Sent from Outlook for Android<https://aka.ms/AAb9ysg> ________________________________ Sent: Friday, January 24, 2025 1:26:28 PM To: [email protected]

I have a 7 PIs including 2 Pi Zeros and 5 PI 4s. I've done 200+ POTA activations with a Pi, most with no Internet connection and no problem. Two of my PIs have been running continously for years now.

A while ago i used BaP to get a pi up and running. Took a long time to learn and operate as i was new to it. Then, finally, once it functioned fine at home, i went on a quick 18 mile overnight

On Thu, Jan 23, 2025 at 07:00 PM, Dominic OE7DRT wrote: Dominic: Thanks for the reminder of the LIST request. Karl: I created an issue ticket ( https://github.com/km4ack/patmenu2/issues/97 ) for

Hi Karl, Karl S via groups.io <ksfound@...> wrote: It looks like that your "zone" has been removed from that winlink catalogue. You can fetch a new list by sending a winlink mail to

FYI Catalog Manager is Kevin N7BO khedgepe at presys.com Ken N7BO looks after the Winlink Catalog. Pat Winlink pulls that data down from the cloud. I would post on the Pat user group to see if

Additionally, I am going to guess that the link at NOAA has changed. I looked at the weather.txt file in patmenu2, but I did not see in that file, the actual full url to the NOAA site, or how the

Well, I followed the instructions and it all went exactly as shown on the video, but when I bring up the VARA HF and VARA FM they are still on the old version.? From what I can tell I have have run

How do I refresh the catalog?? recieved the following from a wx report inquiry... Inquiry Alert Re: FPUS62.KRAH Date: 2025-01-23T14:33:00-05:00 From: SERVICE To: K4GMV Unable to complete Inquiry:

I can't tell from the description how the Pi3 is connected to the radio.? There has to be something in between that converts from the Pi3's digital I/O into the radio's audio.? Plus handle

Consider a 12 gauge to get the job done spectacularly. Seriously, I have five Pi's of various generations, most of which are running 24/7 doing some yeoman job or two.? Only one is connected to a

https://youtu.be/80CU1j36Q6s?si=MX6tyFoqY3TqEhcn I'm going to try ubuntu this weekend. Hope this helps.

So for years I have owned this useless little box. I have watched the videos and have tried multiple times to get this to work with a radio. Any radio. Do anything other then waste my rime and develop