开云体育

[image: image.png] *Logged in remotely from Windows Machine used it to do screen capture.* *Don Poaps* *New Westminster, BC* *VA7DGP DATA* *VA7QU VOICE* *Winlink: va7qu@...

I did. # Linux ALSA is complicated. See User Guide for discussion. # To use something other than the default, generally use plughw # and a card number reported by "arecord -l" command. Example:

If you don't mind beta software and are comfortable installing from the command line, check out this post. https://groups.google.com/forum/#!topic/pat-users/twfX5qJZO_k If you need support installing,

You will need to manually change the soundcard in the direwolf.conf file in your home directory. Look for ADEVICE plughw:1,0 and change to ADEVICE plughw:2,0 save exit and test again -- 73, de

Jason I've loaded the Beta PatMenu V 3. I just plugged the same USB hub from the PI 4 into my Windows Machine. Set up the Kiss TCP 8100 and autostart UZ7HO and started downloading

FYI. I've used FLDIGI and it's programs with the Satern Digital on Saturday. I know that each station must have Flmsg on their PC. I did find that there is some EOC Communication use FLmsg with

Don, Thank you.? Since the RX station has to have FLMSG as well, this will not work for interoperability for those not using a PC and WinLink. Ed

Jason It went to standby and then crashed. I looked for a log but didn't see anything. The SD card in question had the original Pat Menu. I went and downloaded and install Patmenu 2. Orginal Pat Menu

We need more info please. What was the output of direwolf when it "crashed" -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter (

Trying to find why Direwolf crashed. pi@raspberrypi:~ $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: b1 [bcm2835 HDMI 1], device 0: bcm2835 HDMI 1 [bcm2835 HDMI 1] Subdevices:

Keep us informed on the flmsg interface....very interested. N4MIO ________________________________ Sent: Friday, May 29, 2020 1:22:44 PM To: [email protected] <[email protected]> Subject:

You need to save flmsg file and file attach it in a message in Pat Winlink. The recieving station would need flmsg to open it. 73 Don [email protected]> wrote:

I am looking so some additional information (instructions) on creating a message using flmsg and then sending it via ARDOP and also via 2M. Specifically, instructions withing the framework of the

Any experience with this brand of pi hats, etc?? ?Looking specifically at x857 for a slicker sata interface.

> > Haven't ordered mine yet. Just ordered a couple of 4B 4gigs. Less than a > week later they announce the 8Gig!? Storry of my life. Buy something, and > a few weeks later someone else has it at

Hello everyone, I'm new to the group. KM4ACK recommended posting my issue discovered while watching his youtube video: I have a UBX-G6010 KY-172 (should be newest model), running ls -l

Haven't ordered mine yet. Just ordered a couple of 4B 4gigs. Less than a week later they announce the 8Gig!? Storry of my life. Buy something, and a few weeks later someone else has it at half the

After a lot of confusing fooling around on the inter webs and breaking my direwolf.conf repeatedly, I have a reproducible result. Around line 463 there is a DWAIT configuration for transmit delay

You might try PKTFM? -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack ) | Store ( https://km4ack.square.site/

Not sure how much help this will be for a Pi 2 but this might be useful https://youtu.be/QZtAOLcY5dY This is the method that I use to connect my iPad to a Pi3 or 4 when in the field with no internet.