Hello everyone, I'm new to the group. KM4ACK recommended posting my issue discovered while watching his youtube video:
I have a UBX-G6010 KY-172 (should be newest model), running ls -l /dev/serial/by-id informs me to utilize ttyACM0 in my sudo nano /etc/default/gpsd configuration.? Both systemctl is-active gpsd and systemctl is-active chronyd come up active.? I also have a blinking green light on my unit.??
I can't figure out why cgps -s, gpsmon -n, and xgps will not run / populate with data unless I unplug and reinsert my device.? Then they work.? I'm suspecting a port conflict.? I have 2 other bluetooth transmitter devices installed (keyboard & joystick).? I removed those , rebooted and it did'nt resolve the issue. I noted in the comments of the video at least one other guy having this same issue.?
Today I tried running the posted command gpsmon -n. It takes quite a bit and then this comes up on the screen.
tcp://localhost:2947 JSON slave driver> Only available in low-level mod (82) {"class":"VERSION","release":"3.17","rev":"3.17","proto_major":3,"proto_min
Any help or suggestions anyone can offer to get this to work smoothly is greatly appreciated.
I previously installed software package from DL1GKK's web site.? I note that overlay info on right side of my pi desktop goes away after reboot until I pull device out.? Then it magically reappears.? ?Might be software conflict??
Thanks 73 KM6QAQ
Jeremy Pierce