开云体育

As many of us use LoTW would it be helpful if tqsl were added to the options in BAP? Also I have two radios I use portable, an FT857 and a G90, they use a different CAT cable, the issue is sometimes

Mine was a power issue. I had to switch to pi hat that allowed me to run everything from 12v, Power is much better and? the GPS seems to work much better

I had to buy a Pi hat that allowed me to use 12 volts to run the pi system. 3 amps isn't quite enough. My gps would not work half the time and when it did, if I was using flrig, and or digital, the

nb7o, Thanks! When I did what you suggested it killed the GPS functionality from a xgps perspective(but both gpsd and gps were active when queried) and disabled the rig control in wsjt-x. Also did

Typically guys will use either a sound card with VOX for PTT or PTT via CAT control which is fed through a USB port. You could also use the GPIO pins for PTT but this isn't something I have done.

Keith is right about Smokey Mountain Knife Works! Anywhere in the Smokey Mountain National Park is worth the trip. Clingmans Dome ( https://www.nps.gov/grsm/planyourvisit/clingmansdome.htm ) & Cades

Are you running build a pi or did you manually install the GPS? -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack

That not working either. I guess I just cant use flrig for that part if I close flrig and just set it up for the rig itself it works fine. Sent from

Jason, Th IRS and FCC call me Gerald, but my friends call me Jerry. :) Happy to help. -- 73 de N5RKE

First, make sure FLRIG is open and configured for your rig. Then in a terminal window run: */usr/local/bin/rigctld -m 4 * and leave this window open. Open CQRlog, go to File->Preferences. Choose

Don, What was the it you modified?? I'd like to try it but I'm just new to the Pi, but I'm having fun. Thanks, Tim

This is what I get.? Any suggestions? I also don't get gps info in conky.? I'm using the recommended GPS and it locks (flashing green). Any suggestions? Great piece of work here, Thanks!? Tim

I hav searched far and wide, but can't find the answer to this question: What if I want to swap between GPS devices, but don't want to update the code each time? Would it look like this:

First verify the port of your gps witht the following command. ls /dev/*USB* You should see your gps as /dev/ttyUSB0 Now edit gpsd sudo nano /etc/default/gpsd Change your Devices to the folowing

All, There is a bug in 3.0.2 that can keep chirp from updating. A huge thanks to Jerry for allowing me remote access to his system today. If you are having an issue with Chirp updating, open the

Roger, that's beyond what I am doing with it.

Im not having a problem with it logging from wst-x or fldigi. The problem is when using phone ops and ae using dxspots running, cqrlog will not talk to flrig to change frequency’s when clicking on a

What exactly are you trying to make it do? Or rather, what is it not doing that you think it should be doing? I have my CQRLOG reading data from FLDIGI and WSJT-X software on the logging command.

I and trying to get flrig to work with cqrlog and not having any luck. I have every outer program on the BAP working great. Thank you for all the hard work Jason and every one else this BAP is a great

Allan You need to have VOX to PTT unless you use Cat to PTT the radio. I have use Hand Helds to Mobiles. HT and some mobiles have VOX., (Looked to see if FT8900 has vox. Didn't see anything) I use