开云体育

nb7o, Thanks! When I did what you suggested it killed the GPS functionality from a xgps perspective(but both gpsd and gps were active when queried) and disabled the rig control in wsjt-x. Also did

Typically guys will use either a sound card with VOX for PTT or PTT via CAT control which is fed through a USB port. You could also use the GPIO pins for PTT but this isn't something I have done.

Keith is right about Smokey Mountain Knife Works! Anywhere in the Smokey Mountain National Park is worth the trip. Clingmans Dome ( https://www.nps.gov/grsm/planyourvisit/clingmansdome.htm ) & Cades

Are you running build a pi or did you manually install the GPS? -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack

That not working either. I guess I just cant use flrig for that part if I close flrig and just set it up for the rig itself it works fine. Sent from

Jason, Th IRS and FCC call me Gerald, but my friends call me Jerry. :) Happy to help. -- 73 de N5RKE

First, make sure FLRIG is open and configured for your rig. Then in a terminal window run: */usr/local/bin/rigctld -m 4 * and leave this window open. Open CQRlog, go to File->Preferences. Choose

Don, What was the it you modified?? I'd like to try it but I'm just new to the Pi, but I'm having fun. Thanks, Tim

This is what I get.? Any suggestions? I also don't get gps info in conky.? I'm using the recommended GPS and it locks (flashing green). Any suggestions? Great piece of work here, Thanks!?

I hav searched far and wide, but can't find the answer to this question: What if I want to swap between GPS devices, but don't want to update the code each time? Would it look like

First verify the port of your gps witht the following command. ls /dev/*USB* You should see your gps as /dev/ttyUSB0 Now edit gpsd sudo nano /etc/default/gpsd Change your Devices to the

All, There is a bug in 3.0.2 that can keep chirp from updating. A huge thanks to Jerry for allowing me remote access to his system today. If you are having an issue with Chirp updating, open the

Roger, that's beyond what I am doing with it.

Im not having a problem with it logging from wst-x or fldigi. The problem is when using phone ops and ae using dxspots running, cqrlog will not talk to flrig to change frequency’s when clicking on a

What exactly are you trying to make it do? Or rather, what is it not doing that you think it should be doing? I have my CQRLOG reading data from FLDIGI and WSJT-X software on the logging command.

I and trying to get flrig to work with cqrlog and not having any luck. I have every outer program on the BAP working great. Thank you for all the hard work Jason and every one else this BAP is a

Allan You need to have VOX to PTT unless you use Cat to PTT the radio. I have use Hand Helds to Mobiles. HT and some mobiles have VOX., (Looked to see if FT8900 has vox. Didn't see anything) I use

Spend a few hours at the Smokey Mountain Knife Works, it has something for everyone. 73 Keith?KY4KS?

Hi All, First, let me say that this is a great forum and I would not have been able to set up my Pi4 without the information contain herein! Conky on my pi4 w/4gb and the latest build (installed

Don, Thanks for the reply.? There is no VOX in EasyDigi. Alan K6ZY