开云体育

Thanks Jason. -- Echodelta10

I found a website https://www.seeedstudio.com/blog/2020/07/07/raspberry-pi-rtc-tutorial-using-ds1307-and-ds3231-rtcs-with-raspberry-pi-m/ that supposedly makes installing a ds-3231 easy-peasy.? I

Hi Jason!? I watched your video? again. Real Time Clock Script for Raspberry Pi https://www.youtube.com/watch?v=MxUbqotDBnM I think I know why I am having a problem with the rtc install in BAP. I

I have been running Bullseye on a 32 bit system without any issues. Currently the 64 bit OS isn't ready for prime time in my opinion. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar

That video was made on a 32 bit system. I haven't confirmed it will work on the 64 bit OS. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter (

Change the PTT line in direwolf.conf to: PTT RIG 2 localhost:4532 Make sure FLRIG is open first, then open Pi-APRS and test again. Should that fail, close Pi-APRS. Open a terminal window and run

Are the bugs worked out with BAP and Bullseye enough to rely on for Emcomm? Or stay with Buster? Thanks -- Echodelta10

(Thanks for all you do!) working through all the build a pi stuff I can't get my pi to connect to phone gps. I have pi connected by wire and wireless to router. chose wireless. I am SSH into pi from

Hi All, I'm using BAP 3.1.3 on a Pi4 with Buster, my radio is a Yaesu FT-991A. ? Everything except Pi-APRS is running fine (JS8Call, Flrig, Fldigi).? I'm receiving packets but when I click 'Send

Hamlib shouldn't install by default but some applications (WSJTX) require it to be installed. So even if you didn't choose hamlib but choose to install WSJTX, hamlib would be installed in order for

Pat won't install with BAP (stable version) on the 64 bit OS as of right now. It is working on the dev version of BAP. It should work fine on the 32 bit version. Did you try following the directions

What do you have selected for audio in/out in settings? -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack ) |

ft 891 and the sabrent usb card. with js8call it will decode and ptt, But no alc going out. tried poking around with different radio setting and sound setting without any luck.

No, it's not limited to the 64-bit version. I'm still on the 32-bit version and have the same problem both with Bullseye (and, if I remember correctly, also with Buster... but not sure of that).

Thank you Jason, I did that and it showed me as being current and the latest being pulled already. I realized however I'm on the 64 bit version of raspbien so I'm re-flashing the 32 bit version. I'm

Can you explain this?? It seems that Hamlib is installed by default.? I did not select it when I installed BAP and yet when I run through the update tool, Hamlib is listed as "is latest version."?

Assuming you are running the latest Pat Winlink (0.12.1) and you are running Pi OS Bullseye, run the following commands: *cd ~/patmenu2* *git checkout master* *git pull* -- 73, de KM4ACK YouTube (

I don't mean to be a hassle, but I've run into this issue today when running on a new pi build. Is there a proper fix for this currently? Cheers

Hi Jules, I'm glad that you've found the instructions useful! I haven't got a 705 (yet) so maybe someone else could give you an advice. Pat and ardop should be easy tasks if you utilize flrig for CAT

it's normal for them to be listed under multiple categories. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack ) |