开云体育

Thank you for your response. OK, that is part of the issue.? I have three items connected to the USB ports in the?RPi: 1. IC-9700 (internal soundcard) 2. IC-7300 (internal soundcard) 3. GPS With

I ordered the pi zero 2w and will experiment when it comes in. I also have the pisugar2 battery.

I feel like a idiot I was on lower side band not upper. Icant believe I did. It catch that earlier sorry and thanks for the help !!

Thank for your reply Jason. Initially I did drive away from my house but couldn't see the hotspot on my device. I have re installed a fresh image and your excellent BAP, switched off the home wifi and

It has been my experience that using FLRig with my IC-705 is preferred, rather than using the radio directly from WSJT-X. Yes I know that it's a different program, but I found that the radio returns

You might also consider ufw (Uncomplicated Fire Wall) which is included in the Buster and Bullseye distributions and provides some basic firewall protection. It does not obfuscate your location like a

I turned off JS8CALL and FLRIG still has that Issue. I can not change frequencies. It goes directly to 7.078. It will not go to 20 m or other frequencies. I did see vk2sky and ve4ss but I guess it's

Make sure PulseAudio isn't open when you use Ardop. No problem on JS8call or WSJT-X, but ardop will not work if it is open.

It appears as though HAMRS will not run on 64 bit. It may only be available as 32 bit until the developer updates. If anyone finds a workaround, please post. -- 73, de KM4ACK YouTube (

/g/linuxham/topic/js8call_changes_vfo_a_setting/70138103?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,70138103 I found this but I'm running the new RPI OS PI3A+ via VNC 73 73 *Don

No. Both will not allow changing of VFO. If using FLRIG and PAT, the VFO changes. I need to get in mobile to see if it happens with FLDIGI. I didn't load FT 8 etc. I'm seeing the mobile and 40 m

Ok. In pat menu, click on quick stats and post a screenshot. In addition, open up the setting page in pat menu and post a screenshot of that as well. I am assuming that you already have FLRIG open and

I did try that with no luck w1mek

I am starting to dig into the 64 bit OS to solve known issues. So far I have resolved the issues with FLDIGI and Pat. What other applications have you found that won't work on the 64 bit version? --

BAP is configured to always list your USB audio card as 3,0 assuming you are only using one USB sound card. I have tested the latest build several times and it always reports as 3,0. Run the following

Open Pat Menu. Click on Manage Pat Winlink->Set ARDOP PTT. Change to "TRUE" and click Set PTT. Test the connection again. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

As long as the Pi is in range of your home wifi, it will auto connect to it. Once your home wifi is no longer in range, the pi will generate the hotspot allowing you to connect from your phone/tablet.

Are you able to change the frequency in FLRIG? -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack ) | Store (

Hello I’m running BAP on a pi4 and I can not get it to transmit , I am running 991a with cat cable for ft8/js8call with no issues ? When I go to run Pat it will ?not transmit? Any suggestions?