开云体育

Good evening All, Created my first Build A Pi SD card last night.? Added a bunch of Jason's tools, Winlink, Direwolf, Hamclock, Conky etc. I shut the Pi down last night, and returned this eveining

Jason, Something to note. The ARDOP PTT config is available in two locations in PAT Menu. One is in Manage PAt Winlink as you described before, the other is in Settings/Config. I had to make sure both

Just tried a few digferent resolutions again and its always the same with the js8 program. All the features are too large and wont match its window size like the terminal window. Terminal woll adjust

It seems like things like terminal frame are fine with me, just the js8 program.

I'm having the same issue. My PI 3 A+ is nicely set up for my desktop or Toughbook. I tried to change the resolution on the pad and it was a lost cause. I may have to get an Android phone terminal and

Yea i set a few different resolutions and they dont affect the program features, just the entire resolution, which, size wise, im fine with. Ill re-go over the higher res' again just to triple check

I’ve never had any luck with any Chinese radios using VOX and anything packet, although the UV-5R and md380 are the only ones I’ve tried. I ended up using my tnc-x TNC and creating my own cable.

Hey all, I followed Jason's "Pi Zero Project" videos to build a Pi Zero headless setup. A great help for a newcomer to digital modes! No problems with initial install of AX.25 or Pat. All command

Hi folks, I'm having an issue with the Red Cross custom forms with in FLMSG.? You open them with the "Edit Form" button.? It opens the form in the browser opens, but after a few seconds it crashes

I'm struggling to get audio for my IC-705 and JS8Call on RaspberryPI (Bullseye) working. CAT control works fine (button turns green). The dropdowns for "Modulation Soundcard" in Settings are empty /

Have you set a higher resolution for VNC desktop in the pi configuration?

I recalled that I had a Signalink so I ordered a cable. I will report back here to confirm the PTT works. I looked at the Digirig and it looks good. I plan to purchase that for another APRS system.

the same here. I run a raspi 4B also in an ARGON40 with with BAP on Bullseye. The distance argon40 to the router is only 1m, but I loose again and again wifi connection. This maybe after several hours

Kevin, The same RPI4 in the same chassis did the BAP build with a WiFi connection.? Hours of downloads. Never has a significant problem with the WiFi on this machine when running BAP builds on Buster

For Comparison, I put 32bit Bullseye on the card, updated, then did a full install of BAP Everything installed on the first attempt, including FLDIGI So there is something a little different with the

I was hoping anyone could help me out a bit. Im getting portable digital operations ready and, in such, i have a pi 3b+ with js8call on it. The program loads up fine and seems ready to test; but, the

I have an ArgonOne V2 case. I love mine, but they do have an issue with reducing WiFi signal strength (google it). I have one set on it's side (it's headless anyway) with the bottom pointing in the

Did a full build w newest version of BAP on an RPI4 mounted in an ARGON40 enclosure with a 256gb SSD.? Everything went as well as one can hope for.? System worked on SD.? System worked on SSD.?

Did a full install with the newest version of BAP.? Came up nicely.? Both monitors work.? GPS is a little slow to sync ... not a BAP problem.? Transferred the system to the SSDD of my Argon40 and

Every one of my attempted Bullseye upgrades has gone poorly. Every one that worked I started from a clean install. Mike KO4BCN