开云体育

Thanks for the info. This will help in diagnosing the issue. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack ) |

Hey, just wanted to let you know increasing the volume on the pi did make the signalink start transmitting. Thank you for your help and all your hard work on BAP! Beau Liening beau@...

Scott, As for your questions 1.? no 2? ?bottom left only gives call sign 3? ?It's not seeing gps data

Hi Jason, I've been keeping my pi current, both on OS and BAP updates, so there should be no mismatches. I'm still on Buster. The last date on any file in the .wl2k-old file was Nov 5, 2021, so

Hi Bo I have been down that line of thought too. The power connections are quite stout so I don't think that is the root of the low power conditions. In thinking back on it the low power warnings

(1) Does it TX if you goto the "Message" tab and select "General Stations Query"? (2) In the bottom left of XASTIR: Do you get periodic messages about the GPS STATUS. Such as FIX:DGPS ? (3) I had

I blame lack of caffeine, phase of the moon, and local air temperature. Thank you for the catch, corrected in attached.

Thank you very much!!! Just tested it and watched it update the system as soon as it got the GPS signal. For me: line 12 needed to be: sudo nano /etc/default/gpsd

Here are the instructions I wrote up to be able to use NMEA strings to set time. There are a few options mentioned but not in the instructions,like NTP server for network, GPS Grid Square sharing,

Trying to get hf aprs running. Dirwolf loads and in Xastir interface control I show AGWEP up and Network GPS up. I'm using an external GPS which Conky shows up and working. In xastir, I click transmit

Karl, Run these commands to move to Pat Menu 2.5.0. This is specifically designed to work with the new paths of Pat 0.12.x but won't work with older versions of Pat Winlink *cd ~/patmenu2 git

Those changes will certainly work but you shouldn't have had to go to that much trouble and I suspect you will run into other issues with Pat Menu. Can you tell me which version of BAP you are

Anyone else having issues running with their system clock not syncing over GPS? This has been a problem with field ops when my system clock is not sync'd using JS8CALL & other modes. (1) I've tried

Hello Loyd, that is a great idea but I'm occupied in my work so can't take part of this. Do you think to save this session so I or others too can watch the session later on? 73 de Erwin, OE1EKG

*WINLINK CLASS FOR BEGINNERS THIS FRIDAY!* WINLINK IS THE DIGITAL MODE OF CHOICE FOR AUXCOMM, SO THE MORE YOU’RE INVOLVED, THE MORE YOU WILL NEED TO KNOW THIS MODE. BEGINNERS CLASS THIS COMING

Thank you Jason.? So the older Pat Menu 2.4.0 is probably looking to post the propagation report request to the out that it expects to find in the .wl2k/mailbox/??? ---- but of course, since I

If you solder direct to the board, be sure to NOT bypass the protections included to prevent over-current, over-voltage, etc... (I think you meant 5.1v at the Pi, not 7v....)

I found the problem. Firstly, the script that updates the crontab file creates an entry in the crontab that uses "getardoplist" instead of ".getardoplist-cron". Secondly, the path to Pat's config

It's all in the tiny wires in the USB power cables! The charger/supplies put out 5.5v and it's down to the critical 7.0 volts at the pi. I finally found a cable that have a lower wire number (bigger

I hope a SDCard reader can make a difference. Some pull power to drive their internal electronics, too, and still be too much of a draw. If you are getting LowVolt warnings with only a USB memory