开云体育

Thanks for this post, updated to Bullseye today( probably should have waited. BAP got JS8call just fine but used you instructions to get wsjtx on board. got a :(Package 'libhamlib4' is not installed,

I have a fresh install of Bullseye from the download link on the BAP Github page. I did updates after install. I copied the script below into a terminal window and ran it as sudo. It goes as far as

Today I went to update my BAP from the update-tool tab and the tool (itself) needed an upgrade as well. I completed the update and now when I click on the tools I get “invalid desktop entry

Still been hearing that a clean install is the way to go. I did mine last week. I still need to reconfigure & set everything back up.

Jason ,? Everything looks normal, the receive S Meter on the FT857 shows 9 on the bar graph, the receive audio out of the speaker sounds normal. the waterfall looks normal.? When I try to log into a

What do you recommend? Upgrade Buster to Bullseye or clean install of Bullseye and start with new install of BAP? George - AK4NG

I can't think of anything on the Pi that would cause a delay between TX & RX with ARDOP. Have you checked your receive level audio on the Bullseye system? Does the waterfall in ARDOP GUI look similar

The only thing I can think of is that maybe your home router has that port (11123) blocked? If you have the hotspot installed, you can enable it and connect your phone to the hotspot. Use the IP of

You're welcome Jason. I hope you have a wonderful holiday.

Hi Jason, I was just testing the new bullseye build and BAP and found that most thing worked as before except Pat Winlink Ardop into an FT857d.? The problem is that I can raise an Ardop? HF station

I double-checked the seetings listed and they match.? But I still don't see anythng with cgps. Here is my /etc/default/gpsd file: # Devices gpsd should collect to at boot time. #Start gps deamon

A couple of things. Try using an HT or other radio to monitor the frequency when you are attempting a connection with the 705. This will let you verify that the 705 is indeed transmitting the packet.

Thanks for the heads up. I created an issue ticket ( https://github.com/km4ack/pi-build/issues/362 ) and put out a patch until this can be addressed in the next version of BAP. -- 73, de

Hi fellow ops! I have sent ARDOP winlink successfully from my position (DM04PB 850'ASL). I have sent packet (per 705 waterfall) and receive packet (per 705 waterfall and speaker) but can't make a

When trying to install GT on the most recent release of BAP I noticed it would not install. Putting the code to set the GRIDDLL left an empty string. Opening tagloomis.com states he is no longer

Thank Jason, What also worked was the following... Using several grep searches, I found quite a few references to the .wl2k path that I would need to edit.? I decided against creating my own future

Make sure the Pi and the Phone are on the same wifi network. On the phone in GPS2IP, enable UDP push and enter the IP address of the Pi and the port of 11123. Now on the Pi, open the GPS update tool.

Shouldn't the IP address on the Pi in /etc/default/gpsd and cgps be pointing to the Phone? Kevin -- KD9EFV

Hi all, I'm using the BAP "GPS Update Tool" to try and get GPS coordinates from my phone (where GPS2IP is installed and running).? I'm missing some configuration because I get nothing using *cgps*

Thanks Dave. I did find that video after sending out my question. I was able to fix the majority of the main menu, but I still have some organizational stuff to finish up with. Thanks