开云体育

A short term solution on your iPhone, would be to go to “General - About - Name” under “Settings” and change the name of your phone to eliminate the “space”. 73 de N0TLZ Thomas Hann

Hi, I wanted to check out Pi-APRS. Hamlib is installed, direwolf is installed, the Pi-APRS suite is installed. Direwolf works fine for Pat Menu & Winlink on VHF using my IC-7100, therefore the AX.25

I don't know if this helps any either but here is some of the piardopc window: (my audio is set to USB Audio Codec on both input and output) ARDOPC Version 1.0.4.1j-BPQ ARDOPC listening on port 8515

Hey there, Jason. Thanks for the response. Yes, I open FLRIG and then Pat Menu, Start ARdop modem. On the right hand side of my screen, it shows RIGCTL On and FLRIG On and ARDOP On. I'm able to send

Hi Jason Thanks for that tip, since I hadn't planned on using the GPS unit while not making any portable outings I didn't think I needed to install GPS. I will go back and update now and remember to

You will typically only see "Some err" when you don't have the GPS software installed. Use the BAP update tool and install/reinstall GPS and GPS update tool. -- 73, de KM4ACK YouTube (

Great write up! Thanks! -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack ) | Store ( https://km4ack.square.site/

Anthony, Do you have FLRIG open before starting the process? Did you use Pat Menu to start the ARDOP modem before attempting a connection? Post a screenshot of your Pat Menu settings please. -- 73, de

Thanks for the report Dave. It is a known bug ( https://github.com/km4ack/hotspot-tools2/issues/9 ) in hotspot tools. It is on the schedule to be resolved this fall. -- 73, de KM4ACK YouTube (

I had the same problem when powering by the supply included and from a usb port on my rigrunner panel. then tried a buck converter 12v to 5.1v @4amps with no power supply problems. if the voltage

I was having trouble with VHF Winlink on the IC-7100, but now having it working well. I'm making this post so that anyone else who has an IC-7100 (or any recent Icom radio) can see the settings that

Hate to beat a dead horse here but I'm totally frustrated and lost. This is what I get when I start ARdop.. new BAP build from scratch. Flrig and WSJT-x work fine and rig is controlled. Pat just

Good to know! Thank you for sharing. 73, Fred/N7PN

I needed to use a cellular data connection last weekend in supporting a 100 mile foot race when our antenna was damaged in a microburst and was unable to ADD and USE my cellphone Hotspot.? I used

Just been participating in the TAPR DCC and they made an interesting observation that I though worth reposting - when working with the Pi - The Pi isn't natively grounded even in the shack as it's

You can use the “voltage_v” variable in conky to output cpu voltage. That ouputs in volts. There is also “voltage_mv” to output ?in millivolts. something like: ${execi 5 voltage_v}

Hi On my Rpi 4 4GB while operating at home without a GPS unit plugged in, using home wifi I am seeing on the Conky display instead of "No GPS" I think "Some err". I think I have traced it to the

Don, Thanks for the info. ?As it turns out Mobilinkd responded this morning and assured me that they are alive and well! ?Order placed. Cliff KF7KU

Hi Terry There is a brief notice that comes to the upper right screen showing a warning of low, not value, voltage and then clears. I will check to see what shows up in /var/log folder that might be

Thanks to all for your comments and suggestions.