Hey there, Jason. Thanks for the response. Yes, I open FLRIG and then Pat Menu, Start ARdop modem. On the right hand side of my screen, it shows RIGCTL On and FLRIG On and ARDOP On. I'm able to send messages via telnet but it says it can't QSY when trying to put in the frequency for the destination or by using Aliases. Hope this helps.?
#Config file for Pat Menu
#20200429 KM4ACK
MYCALLSIGN=WD2AJW
MAP=usa
RIGCONTROL=yes
ARDOP="/home/pi/ardop/./piardopc 8515 plughw:2,0 plughw:2,0"
ARDOPGUI="/home/pi/ardop/./piARDOP_GUI"
DIREWOLF="direwolf -p"
KISS="sudo /usr/sbin/kissattach /tmp/kisstnc"
AXP=wl2k
RIG="/usr/local/bin/rigctl -m 4"
MODEHF=USB
MODE2M=FM
PORT=8080
LOG=/home/pi/Documents/mylog.txt
AMRRON=no
