开云体育

Lets no hijack this thread with Conky.? Open a new thread and include specifics on what you see, and what you have tried to do to fix it and I am sure we can help.? My Conky works well on an rpi4

Hi David, I'm a SDR rookie and have a RTL-SDR and a receiving loop antenna to use with it.? If you have some advice for what software to use it will be greatly appreciated.? Also I'm wondering do I

I'm having no luck getting my TS-2000 working with flrig. My Linux ignorance plays a role in this, I'm sure. I installed flrig on my Pi 4. I'm using a Signalink USB interface between Pi and the rig.

Did you install VNC for RPi on the device? Installing VNC and changing the screen size in raspi-config to 1024 x768 and adding a on startup command fixed my issue with VNC. I had same conflict. There

Any ideas on how to troubleshoot in order to get mine working? Trevor KJ7MLK [email protected]> wrote:

I have not had that happen to me however; when I set up my BAP's (on pi3b+ and pi4B) I used putty to ssh on to the pi's used raspi-config to turn or VNC then rebooted no errors. The pi's don't react

Thank You Jason!

Little late to the GPS messages but ... On an Android smartphone, you can share the phone GPS with an application like Share GPS. https://play.google.com/store/apps/details?id=com.jillybunch.shareGPS

I have run into the problem too.?? I have found the issue is setting the screen resolution. See KM4ACK's notes. ?Raspberry Pi Build Guide - http://tiny.cc/pi4guide

Ron, Great find on networking gpsd, I’ve never been able to get that to work until now. I’ve successfully used cgps as well as xastir on a remote device and it seems to work great. I don’t have

I’m experiencing the same issue as well while using VNC. Jim-K0JNR

I thought I had followed directions to make my Pi 4 headless (in fact, have a headless Pi 3)... VNC enabled and remote access, however one issue: When I disconnect the monitor (mini HDMI jack) and

Thank you Jason. Droidstar now working here, and it helped me become familiar with the DMR systems and some settings.? I can now connect with other hams, on their DMR radios, if I am in an

Thanks for feedback. I was thinking on a new fresh install and will try this. Then i will report back to you Greetings from the Namib Pieter Jacobs De v51pj 73

Let's address the missing update menu item first. Haven't seen this happen before but should be an easy fix. Open a terminal window and run: *nano /usr/local/share/applications/build-a-pi.desktop*

Let me start by saying that this is purely an educated guess on my part but should point you in the right direction. First, attempt to pair the pi with the GPS using the GUI Bluetooth icon up by the

I don't mind the discussion being held here at all :-) Just not something that I plan to dive into soon. You guys are more than welcome to discuss it. -- 73, de KM4ACK YouTube (

Change AMRRON to No in your pat menu setting and try it again. This setting is only for a special use case. Did you compile libusb1.0 manually? It was the only way I was able to get hamlib 4.3

Yes. Build a Pi updates does the following: sudo apt-get -y update sudo apt-get -y upgrade sudo apt -y full-upgrade -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

In pat menu, click on Manage Pat Winlink->Set ARDOP PTT. Set to "true" and then click Set PTT.