开云体育

Jumping in here, but keep in mind, my use case is quite limited; mostly just Pat for Winlink access. And even at that, it's mostly just tinkering, and nothing serious. All that said, I am able to

Sorry Garret, I can't answer the question as I have no experience with the D710G. Maybe someone else who owns the rig can jump in here. You might also check the direwolf forum

I'm using the Argon 4 case with SSD and the USB 3.0 ports are jamming the gps dongle. I connected a long USB and that's okay, but is messy and fragile with the cable strewn across the room. I have a

If it will be plugged in at boot, change the /etc/default/gpsd file so that autostart is false rather than true. That fixed an issue for me.

**uncommented** dang spellchecker

***uncommented***

Yes, blinking steadily like it did when it was working in Conky.

Jason, Thanks for your wonderful videos. With zero experience I have my Pi running through a VNC. My main purpose for this Pi is to create an I-Gate for my Kenwood D710G as a APRS radio for the QTH. I

***uncommented*** dang spellchecker

Al, There was a “hdmi_mode=1” that I I commented that seems to work. Remote VNC takes awhile but it does refresh after reboot. Thanks a bunch. ? Richard - KI5EVJ

Good day all after a BAP. Update of software on my rpi4b 8GB the following happened qsstv was the older version as found under preferences- add / remove software -QSSTV The problem with that version

Is the green light blinking on the GPS? This will indicate that the GPS has a lock on satellites. If not, try setting the GPS next to a window. It may just need a clear line of sight to the sky. --

HiFiBerry makes a Pi3b version of that case. I know because I ordered it by mistake! The HiFiBerry HighPi case for Pi4 is currently out of stock on Amazon, which is what led me to order the wrong one.

I have had to restart Conky and/or run the configuration for the GPS again. It seems like the GPS doesn't always start on it's own. -- Al AE2T

I'm figuring out the PI and what all it can do but I could use some help on the USB U-blox7 GPS. It was showing the gridsquare fine in Conky but now I have nothing. I'm not sure it's working at all

I can confirm that behavior. I don't mind the VNC connection being lost, it would be anyway, but being able to reboot and have it restart on it's own unattended is crucial. -- Al AE2T

That is not the MakerFocus board causing that. You need to add a line (possibly uncomment it, if it's already in there) to your /boot/config.txt file #for VNC headless operation # see

Jason et al.: I added the MakerFocus Power board to my Pi 4 so I could rum the Pi from a 12v battery. I did run the script - it appears that all it does is allow the remote to turn on the board after

You are exactly right Jason…the Digimode-4 was connected during BAP install. And to clarify, by “Allow the selection of None…” I meant “Add None to the dropdown…”. Obviously ?this

Good afternoon Vic. I don't understand it either! I can get FLrig running fine connected to the 'serial port' of the IC-705. However if I try to set up the 'audio' port to use -- FLdigi for instance,